Summary of Contents for Genssi MST-SOS1
- Page 1 Specifications and Operations of MST-SOS1 Handheld Emergency Power Supply & Engine Starter...
-
Page 2: Products Introduction
MST-SOS1 compact at 6.5 inches wide, it also weights only 2.5 lbs! Imagine never having to worry about a drained battery when you're on the go. Small enough to fit in your glove box, the MST-SOS1 is the most useful safety product you can own. - Page 3 1.3 Introduction （ （ （ （ PIC 1） ） ） ） （ （ （ （ PIC 2） ） ） ）...
- Page 4 （ （ （ （ PIC 3） ） ） ） 1. Hand rope attachment 2. Input: 2A, 12V power Input for internal charging. 3. Output 12V, 2 A for 12V electrical charging. 4. Output 5V, 2A, for 5V electrical charging interface (mainly for the most mobile phone charge).
-
Page 5: Parts Illustration
1.4 Parts illustration picture illustrate name 1. MST-SOS1 Charger 2. AC-DC 110V or Adapter 220V AC outlet Connection 3. Mobile cable used phone main for mobile charger phones Connection 4. SONY for mobile Ericsson mobile phones and phone joint charging... - Page 6 Connection 5. MINI USB for mobile joint phones and charging Connection 6. Samsung for mobile mobile phone phones and charge joint charging 7. Apple mobile Connection phone charge for mobile joint phones and charging Connection 8. Mini USB for mobile joint phones and charging...
- Page 7 Connection 10. Laptop cable used charging cable for laptops Connection 11. HP dell, computer for Laptop charge plug Connection 12. Lenovo Thinkpad for Laptop charging plug Connection for Laptop Lenovo computer charging plug...
- Page 8 Connection Samsung computer for Laptop charging plug Connection for Laptop For Vehicles, Battery ATV, Jump Start Motorcycle Connection Cigar Vehicles Adapter for Charging...
-
Page 9: Operating Instructions
Input of the MST-SOS1. When charging, the battery indicator will flash until fully charged. 2. Vehicle Jump Starting Connect the provided cables to the output of the MST-SOS1 labeled for jump start. (PIC 4) Make sure you do not reverse polarity as the device can be damaged and cause possible harm. - Page 10 10 seconds. The MST-S0S1 must be fully charged for vehicle starting. After your vehicle is started, please put your MST-SOS1 for charging. The MST-SOS1 provides a burst of high current that can drain its battery within seconds. Please do not keep the MST-SOS1 connected to your battery for more than 10 seconds.
- Page 11 2-3 hours. 5. Lighting and Warning Distress flashlight The MST-SOS1 is equipped with multifuntion LED flash light that can be turned on with the Light SW button. Pressing the light switch multiple times will change the light into a different patterns including flash pattern.
-
Page 12: Specifications
Charge every 3 months to maintain battery life. 3.2.3 Physical Handling The MST-SOS1 is a sensitive electronic device. Do not drop or bump on surfaces during use. Keep away from excessive vibration. Do no reverse polarity the +/- terminals if used for vehicle jump start. Do not store or dispose in fire.
Need help?
Do you have a question about the MST-SOS1 and is the answer not in the manual?
Questions and answers