108
Using the TV's features
Using REGZA-LINK®
Item:
Description:
Speaker
From this item, you can set your audio output preference to the TV speakers
Preference
or the audio receiver speakers. When this item is set to Audio Receiver, the
TV remote can be used to adjust or mute the volume of the audio. This item
will be grayed out unless a REGZA-LINK
connected.
NOTE
Setting up REGZA-LINK
To set the REGZA-LINK
1
From the Setup menu, highlight REGZA-LINK
press the ENTER button.
2
Press the ( /
REGZA-LINK
Press the ( /
3
NOTE
4
Press the ( /
REGZA-LINK
( /
❖
❖
❖
❖
5
To save the new settings, highlight Done and press the ENTER
button.
To revert to the factory defaults, highlight Reset and press the
ENTER button.
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver's speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
®
arrow) buttons to highlight Enable
®
.
arrow) buttons to select On.
If you select Enable REGZA-LINK
out.
arrow) buttons to highlight the
®
Setup item you want to use, and press the
arrow) buttons to select On or the desired mode.
TV Auto Input Switch: On/Off
TV Auto Power: On/Off
Device Auto Standby: On/Off
Speaker Preference: TV Speakers/Audio Receiver
®
compatible audio receiver is
®
Setup:
®
Off, the other items will be grayed
®
Setup and