Setup; Setting The Time & Date; Battery Backup (Optional) - American Innovative, Neverlate Executive NL7DEX-US Instructions For Use Manual

Setup

Setting the Time & Date
The first time you plug in your Neverlate, use the Setup
Sequence to input the current time and date:
1. Ensure that the MODE knob is in either the "Run" or "All
Off" position. Press and hold the SETUP key for two (2)
seconds to initiate the Setup Sequence.
2. Twist the VALUE collar or use the SEEK | SCAN +/- keys
to adjust the value of each parameter.
3. Press the SETUP key between steps and to complete the
procedure.
Step Name Description
T-FORM Time Format (12/24 HR)
Select 12- or 24-hour clock format.
TIME Current Time
Enter the current time. Note: The SRC | SAVE key may
be used to toggle between AM and PM.
D-FORM Date Format (MM.DD or DD.MM)
Select Month.Day or Day.Month date format.
MONTH Month (1 – 12)
Enter the numeric month.
DAY Day (1 – 31)
Enter the day.
YEAR Year (2000 – 2099)
Enter the year.

Battery Backup (optional)

Your Neverlate uses one CR2032 button cell battery to retain its
memory. Install the battery with the positive side ( + ) facing
out. In the event of a power outage the LCD display is not
illuminated but the time, alarm settings and other preferences
will be retained until the power is restored.
WARNING: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
Page 9
TIP: The STATION PRESET
PREV/NEXT keys may be
used to step back and forth
between steps.
TIP: Exit the Setup
Sequence at any time by
pressing the
ON | OFF key.
TIP: The Setup Sequence
exits automatically after
sixty (60) seconds of
inactivity.
TIP: This feature is also
convenient should you wish
to relocate your Neverlate
from one room to another.
TIP: The CR2032 button
cell battery is available for
purchase at your local drug
or electronics store.
U.S. Patent No. 7,463,556
© 2011 American Innovative, LLC.