Advertisement
INSTALLING THE DRIVERS (PC ONLY)
On PC systems, you will be required to install audio
drivers. These can be found on the Soundcraft website.
The drivers install software which is needed to enable
communication between console and PC. The driver
package also installs the control panel tool for adjusting
various settings such as buffer size, input/output
patching and synchronisation of the Firewire and USB
mediums.
Once drivers are installed shortcuts for the control panel are normally available on the desktop
or in program files under Soundcraft digital audio driver 1394 (USB).
When the card is connected to the computer taskbar, icons will
indicate a device has been detected. Clicking the icon will open
the appropriate control panel.
When the drivers are installed onto your PC, you will need to
power it down, connect the Multi Digital card and then reboot
for the process to be complete.
NOTE: There is no need to install drivers on a Mac as the Multi Digital Card uses Apple's
Core Audio drivers.
Some DAWs detect the Multi Digital card and automatically prompt you to use the
Soundcraft Digital (0000) audio driver; if your DAW does not present a similar dialogue
you may have to detect the card manually.
Please refer to the documentation for your DAW, Mac or PC for details of how to adjust
audio settings.
Soundcraft Si Multi Digital Card User Guide 1013
Taskbar icon indicating drivers
are loaded and console is
connected.
7
Advertisement
