MyPBX Settings ............................3 2N Helios IP Door Phone Settings ......................3 Register 2N Helios IP Door Phone as MyPBX Extension ..............3 Codec Settings of 2N Helios IP Door Phone ..................4 Set Extension to Control 2N Helios IP Door Phone ................4 Configure Yealink VP530 ..........................
Registrar address: MyPBX IP address or domain. Figure 3 Codec Settings of 2N Helios IP Door Phone Go to 2N Helios IP Door Phone ‘Advanced Setting->Audio Codecs’, set PCMU and PCMA as the available audio codec. Figure 4 Go to 2N Helios IP Door Phone ‘Advanced Setting->Video Codecs’, set H264 as the available video codec.
2N Helios IP Door Phone with MyPBX Configuration Guide Figure 6 4. Configure Yealink VP530 4.1 Register VP530 as MyPBX Extension Go to VP530 configuration web ‘Account->basic’ page. Account: Select an account to register. Account Active: Enabled. Label: Customizable. Display name: Customizable.
2N Helios IP Door Phone with MyPBX Configuration Guide 4.2 Configure Codec of the account Go to VP530 ‘Account->Codec’ page. Account: Select the account which is registered as MyPBX extension right now. Voice Codecs: Enable PCMU and PCMA. Video Codecs: Enable H264 Figure 9 4.3 Configure Door Phone Option...
Page 7
2N Helios IP Door Phone with MyPBX Configuration Guide Figure 10 Done the settings, when someone rings the door bell, VP530 will ring and show ‘Door Open’ button on the phone screen. Click the button to unlock the door. Figure 11 [Finish] http://www.yeastar.com...