Fuel Sediment Cup Cleaning - Honda EW171 Owner's Manual

Fuel Sediment Cup Cleaning
The sediment cup prevents dirt or water which may be in the fuel tank from
entering the carburetor. If the engine has not been run
for
a long time, the
sediment cup should be cleaned.
1. Turn the fuel valve lever to the OFF position. Remove the sediment cup, 0-
ring, and filter.
2. Clean the sediment cup, O-ring, and filter in nonflammable or high flash
point solvent.
3. Reinstall the filter, O-ring, and sediment cup.
4. Turn the fuel valve lever ON and check for leaks.
FUEL VALVE LEVER
FUEL FILTER-
SEDIMENT CUP
36