Operation; Controlling The Connected End Device Via The Mmi - Audi Bluetooth adapter Operating Instructions Manual

®
After connecting the Bluetooth
face, the blue LED in the adapter flashes with a low frequency during
®
the search for Bluetooth devices. Before music can be played, your
A2DP-compatible end device must be connected to the adapter via
®
the Bluetooth connection. Consult the operating instructions for
your A2DP-compatible end device to find out how to carry out the
connecting process (mobile phone or MP3 player). Connection must
take place in accordance with the instructions provided in this docu-
ment and the operating status of the end device to be connected.
The access code, passkey or PIN is "1234". Following connection
and a short initialization phase, the A2DP central menu appears
with the name of the end device in the title line of the MMI display.
®
If the Bluetooth connection has been made correctly, the blue LED
lights up constantly in the Bluetooth
Note
•
If several A2DP-compatible end devices are located in the
®
vehicle, the Bluetooth adapter connects with the end device which
was most recently connected. If necessary, confirm the connection
to the end device.
•
®
The Bluetooth adapter puts the end device in Play mode and
the end device starts to play automatically. While the track is
playing, the blue LED in the adapter flashes with a high frequency.
While an A2DP-compatible end device is connected to the Blue-
®
tooth adapter, the adapter is hidden from other Bluetooth
devices.
•
If the track is only played on the connected end device, the track
can be transferred manually to the MMI by selecting Forced Audio
Connect ⇒ page 5.
•
When using further functions of the connected A2DP-compatible
end device, e.g. when transmitting large data quantities to another
Bluetooth-enabled end device, the audio transmission my be
impaired. If this happens, stop the transmission!
adapter to the Audi music inter-
®
adapter.
®

Operation

Controlling the connected end device via the
MMI
®
All functions of the Bluetooth adapter can be accessed via the intu-
itive and standardized operating concept of the MMI terminal
⇒ "Infotainment/MMI, Operating instructions", section "General
operation".
Function overview:
Current Track
Next Track
Previous Track
Manual
On/Off switch
< and >
Note
The manual control functions MIX (Track mix) and SCAN (Play intro)
are not supported by the Bluetooth
Operation
The current track is played.
The next track is played.
The previous track is played.
Functions selected via the con-
trol wheel (e.g Fast-for-
ward/Rewind).
Stop track (Pause).
Fast-forward and Rewind the
track by pressing the arrow keys
on the MMI terminal.
®
adapter.
5