Do you have a question about the MCX300 and is the answer not in the manual?
Questions and answers
Summary of Contents for rauland MCX300
Page 1
Installation and Operation KI-1976 MCX300 AM-FM Tuner and Cassette Tape Player Rauland-Borg Corporation Issued: 07/01/98 Page 1 of 8...
Page 2
Copyright 1998 by Rauland-Borg Corporation, all rights reserved. This document contains user’s information on technology that is proprietary to Rauland-Borg Corporation. Permitted transmittal, receipt, or possession of this document does not express license or imply any rights to use, sell, design or manufacture this information. No reproduction, publication, or disclosure of this information, in whole or in part, shall be made without prior written authorization from an officer of Rauland-Borg Corporation.
Revised Model This manual is for the revised MCX300, which began shipping in May 1996. It features a slightly different tuner and tape player but retains the same specifications and convenient plug-in connectors as the previous model. For the older-versions of the MCX300, see KI-1745, KI-1967, KI-1950 and KI-1972.
Page 5
MCX300 AM-FM Tuner and Cassette Tape Player —Installation and Operation 3DFNLQJ/LVWDQG8QSDFNLQJ3URFHVV The MCX300 comes completely assembled. The only separate items besides the main chassis are the AM/FM cassette receiver manual, the 12-VDC power supply and the screws, washers, & self-retaining nuts for fastening the chassis to the rack:...
Plug the RCA-type phono plug into the “Audio Output” jack of the MCX300, and the other end of the cable into the “Auxiliary” or “Tuner” input of the main system.
MCX300 AM-FM Tuner and Cassette Tape Player —Installation and Operation audio adjustments can be tried initially. Make adjustments as needed to obtain the desired performance. You may find it helpful to play the unit through its monitor speaker for the initial settings.
Page 8
MCX300 AM-FM Tuner and Cassette Tape Player —Installation and Operation The “Monitor” position plays the unit through the front-panel speaker. The “Program” position plays the unit through the interconnected system. The “Program/Monitor” position plays the unit through both the system and the monitor speaker.
Page 9
GROUND CLAMP DOWNLEAD OR LEAD-IN WIRE (NOTES 1 & 2) ANTENNA RECEIVER DISCHARGE MAST UNIT GROUND WIRE (NOTE 3) (NOTES 1 & 2) GROUND WIRE GROUND CLAMP GROUNDING ELECTRODE DRIVEN 8' INTO THE EARTH (2.44 METERS) NOTES: 1. USE #10 AWG COPPER, #8 AWG ALUMINIUM, OR #17 AWG COPPER-CLAD STEEL OR BRONZE WIRE (OR LARGER) AS GROUND WIRE FOR BOTH MAST AND LEAD-IN.
Need help?
Do you have a question about the MCX300 and is the answer not in the manual?
Questions and answers