Intended Use; Operation - DeWalt DCF886-XE Instruction Manual

FIG. 2
G
C
D
G
A
E
F

INTENDED USE

These impact drivers are designed for professional impact screwdriving applications.
The impact function makes this tool particularly useful for driving fasteners in wood,
metal and concrete. DO NOT use under wet conditions or in presence of flammable
liquids or gases.
These impact drivers are professional power tools. DO NOT let children come into
contact with the tool. Supervision is required when inexperienced operators use this
tool.
G
G
B
H
I
J
I
Belt Hook and Bit Clip (Fig. 2)
WARNING: To reduce the risk of serious personal injury, turn the tool off and
disconnect the battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can cause injury.
WARNING: To reduce the risk of serious personal injury, DO NOT suspend tool
overhead or suspend objects from the belt hook. ONLY hang tool's belt hook from a
work belt.
WARNING: To reduce the risk of serious personal injury, ensure the screw holding
the belt hook and bit clip is secure.
IMPORTANT: When attaching or replacing the belt hook or bit clip, use only the screw
(I) that is provided. Be sure to securely tighten the screw.
The belt hook (H) and bit clip (J) can be be attached to either side of the tool using
only the screw (I) provided, to accommodate left- or right-handed users. If the hook is
not desired at all, it can be removed from the tool.
To move the belt hook or bit clip, remove the screw (I) that holds the belt hook and
bit clip in place, then reassemble on the opposite side. Be sure to securely tighten the
screw.

OPERATION

WARNING: To reduce the risk of serious personal injury, turn the tool off and
disconnect the battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can cause injury.
Installing and Removing the Battery Pack (Fig. 3)
NOTE: For best results, make sure your
battery pack is fully charged.
To install the battery pack (F) into the
tool handle, align the battery pack with
the rails inside the tool's handle and slide
it into the handle until the battery pack is
firmly seated in the tool and ensure that
it does not disengage.
8
FIG. 3
F
E