Advertisement
Advertisement
Table of Contents
Summary of Contents for Retail Data Partnership OPTICON
- Page 1 The Retail Data Partnership Ltd OPTICON User Guide...
- Page 2 Getting Started. Switch on the Opticon by pressing the red button on the top. Then press the start icon at top left of screen followed by the SMLite Icon. After a couple of seconds the “Connections Details” screen will appear.
- Page 3 When you have pressed OK, you will see the Stock Take Group that you have just created. You then need to assign the stock take sessions to the group, to do this press group name highlight the group, you will then see several buttons appear in the centre of the screen. If you then press , a Stock Take session will be created and the time and date will be displayed.
- Page 4 Product Management There are a number of important points about adding new products. These are summarised here: When adding the description of a product, think about how you (or another member of staff) will re- order it when it starts to run out. Give enough detail to identify it easily e.g. weight, volume etc. If it is a soft drink do not just enter the description “pop.”...
- Page 5 Categorisation - can be swapped between an RDP category and a User category. The default is set to the categories set by The Retail Data Partnership and is titled RDP. You will need to set up your categories before you can manage them locally. See section 11.1 of the manual.
- Page 6 Shelf Edge Label - You can select Print Quick Label to print a label from the receipt printer. You can also select Add to Label List to print on the laser printer when you have a list of 21. See section 13 of the manual for printing shelf edge labels.
Need help?
Do you have a question about the OPTICON and is the answer not in the manual?
Questions and answers