Johnson 40-6004 Instruction Manual

Laser distance measure

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

6833H-English_Manuals 4/2/13 1:26 PM Page 1

Laser Distance Measure

Model No. 40-6004

Instruction Manual

Congratulations on your choice of this Laser Distance Measure. We

suggest you read this instruction manual thoroughly before using the

instrument. Save this instruction manual for future use.

This is a Class II laser tool and is manufactured to comply with CRF 21,

parts 1040.10 and 1040.11 as well as international safety rule IEC 285.

The laser also complies with EMC Test according to EN61000-6-3;

2001+A11:2004, EN 6100-6-1:2011, EN 6100-4-2, EN 61000-4-3, EN

60825, FCC Test according to PART 15.

Table of Contents

Summary of Contents for Johnson 40-6004

Page 1 1040.10 and 1040.11 as well as international safety rule IEC 285. The laser also complies with EMC Test according to EN61000-6-3; 2001+A11:2004, EN 6100-6-1:2011, EN 6100-4-2, EN 61000-4-3, EN 60825, FCC Test according to PART 15. ©2013 Johnson Level & Tool - Rev. 1...
Page 2: Table Of Contents
Failure to do so, may result in bodily injury. CAUTION! Class II Laser Product Max. Power Output: Wavelength: 640-660nm THIS TOOL EMITS LASER RADIATION. DO NOT STARE INTO BEAM. AVOID DIRECT EYE EXPOSURE. ©2013 Johnson Level & Tool - Rev. 1...
Page 3: Location/Content Of Warning Labels
• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt to repair this tool, warranty will be void. • Use only original Johnson ® parts and accessories purchased from your Johnson ® authorized dealer. 3. Location/Content of Warning Labels ©2013 Johnson Level & Tool - Rev. 1...
Page 4: Location Of Parts/Components
11. Measuring Reference Position/ Area Continuous Laser Mode Volume 12. Receiver Window Pythagoras 13. Battery Cover 5. Unit of Measure 14. Corner Measurement 6. Wrist Strap Bracket Extension Piece 7. Laser Emitting Window ©2013 Johnson Level & Tool - Rev. 1...
Page 5 Single Pythagoras 7. Minimum Display 3. Measuring Function 8. Main Screen and Units of Measure Area Measuring 9. Battery Status Volume Measuring 10. Sub-Screen and Units 4. Measurement Reference Position of Measure ©2013 Johnson Level & Tool - Rev. 1...
Page 6 This is most important if the instrument has been exposed to abnormal use. Always confirm accuracy before and during important measurements. Keep the laser distance measure optic clean and inspect for damage. ©2013 Johnson Level & Tool - Rev. 1...
Page 7: Start Up - Battery Installation Instructions
Press Power Button to power up. Press and hold Power Button to power off. Automatic Shutoff Laser will turn off after 30 seconds Unit will turn off after 3 minutes of inactivity ©2013 Johnson Level & Tool - Rev. 1...
Page 8: Using The Product
0.00 ft 0.00 ft 0.00 ft 0’0” 0.00 ft 0.00 ft 1/32 0.00 in 0.00 ft 0.00 ft 0.00 ft 0.00 ft 1/32 0.00 ft 0.00 ft 1/16 0.00 ft 0.00 ft ©2013 Johnson Level & Tool - Rev. 1...
Page 9 Press and release Keep unit still until measurement has been recorded. Laser beam will shut off once measurement has been recorded. Press and release to clear screen. Press and hold to power down unit. ©2013 Johnson Level & Tool - Rev. 1...
Page 10 For example, if you need the square footage of four rooms this instrument will allow you to add each area calculation together to sum the dimensions of the four ©2013 Johnson Level & Tool - Rev. 1...
Page 11 As the laser beam is scanned across the measuring surface, the maximum and minimum distance is simultaneously recorded in the sub value positions on the screen as the laser is scanning the targeted surface. ©2013 Johnson Level & Tool - Rev. 1...
Page 12 To tally (or sum) the Area calculations of multiple rooms use the following steps: Suggestions: Be sure you have the desired unit of measure selected. For better visibility press and hold the backlight button activate the backlight. ©2013 Johnson Level & Tool - Rev. 1...
Page 13 Follow this sequence to continue tallying additional room dimensions. To subtract an Area measurement simply press and release the button during the sequence and that value will be deducted from the total. ©2013 Johnson Level & Tool - Rev. 1...
Page 14 To tally (or sum) the Volume calculations of multiple rooms use the following steps: Suggestions: Be sure you have the desired unit of measure selected. ©2013 Johnson Level & Tool - Rev. 1...
Page 15 Follow this sequence to continue tallying additional room dimensions. To subtract an Volume measurement simply press and release the button during the sequence and that value will be deducted from the total. ©2013 Johnson Level & Tool - Rev. 1...
Page 16 Do not move your hand when preparing to take the second measurement. Simply pivot your wrist (keeping instrument in same position) to align the next target. Then record next measurement. Calculates distance between Point 1 and Point 2 ©2013 Johnson Level & Tool - Rev. 1...
Page 17 Follow the Indirect measurement instructions above to enter Indirect measurement mode. Once the first Indirect measurement calculation is taken it will be displayed in the bottom row on the LCD screen. ©2013 Johnson Level & Tool - Rev. 1...
Page 18 Follow this sequence to continue tallying additional Indirect measurement dimensions. To subtract an Indirect measurement simply press and release the button during the sequence and that value will be deducted from the total. ©2013 Johnson Level & Tool - Rev. 1...
Page 19 Please note that in some situations the unit may have difficulty reading the surface you try to measure if lighting or sunlight is intense and/or the surface being measured does not reflect the laser beam appropriately. ©2013 Johnson Level & Tool - Rev. 1...
Page 20 Install a new battery Err06 Temperature is outside of working range Measure in an environment within specified working temperature range Err07 Ambient light is too strong Measure in a darker place (shadow target) ©2013 Johnson Level & Tool - Rev. 1...
Page 21 LDM up to the material. Then take measurement. Place a white sheet of paper over the targeted measuring surface if error message Err02 occurs to improve the return signal. ©2013 Johnson Level & Tool - Rev. 1...
Page 22: Technical Specifications
*The working range and accuracy is dependent on how well laser light is reflected from the surface for the target and with increased brightness of the ambient light intensity measuring accuracy may deteriorate. ©2013 Johnson Level & Tool - Rev. 1...
Page 23: Product Warranty
6833H-English_Manuals 4/2/13 1:26 PM Page 23 8. Product Warranty Johnson Level & Tool offers a two year limited warranty on our laser distance measure products. You can obtain a copy of the limited warranty for a Johnson Level & Tool product by contacting Johnson Level &...
Page 24: Product Registration
PLEASE NOTE THAT IN ADDITION TO ANY OTHER LIMITATIONS OR CONDITIONS OF JOHNSON LEVEL & TOOL'S LIMITED WARRANTY, JOHNSON LEVEL & TOOL MUST HAVE RECEIVED YOUR PROPERLY COMPLETED WARRANTY CARD WITHIN 30 DAYS OF YOUR PURCHASE OF THE PRODUCT OR ANY LIMITED WARRANTY THAT MAY APPLY SHALL NOT APPLY AND THERE SHALL BE NO WARRANTY.