Hallicrafters SR-150 Operation And Maintenance Manual page 51

V. LUBRICATION
A. VFO Assembly
1.
2.
B. Chassis Assembly
1.
Credits and Disclaimer for test spec:
Thanks goes to Jim, K9AXN for providing me with the copy of the copy of the original document. The copy
was not clear enough to reproduce so I transcribed the document. When I transcribed this document I did not
try to correct any English, punctuation or spelling. Neither did I update the mnemonics such as CPS to Hz. It is
as it WAS. I hope you find it useful, 73's Walt WD0GOF
By Walter Cates WD0GOF (UPDATE 10/30/2013)
Light oil (3 in 1 type)
a. Four nyliners, 077-202301, located in bushings 077-002851.
b. Two nyliners, 077-202301, located in pinion of dial disc, 026-001087.
Grease (093-000542)
a. Spur gear, 026-001088 and 026-00089
b. Gear Bushings 077-002850
c. Gear pinion 026-001087
Grease (093-000542)
a. Rear end of preselector outer shaft, 074-002791-02, and preselector inner shaft,
074-002756-03
b. Shaft, outer final tune, 074-002756-02
c. Handle knob, 030-000793, and screw machine, 003-007550
51