Connections; Cradle - Datalogic F725-E SERIES User Manual

CONNECTIONS

2 CONNECTIONS
2.1

CRADLE

To make the F725-E series terminal operative, it is necessary to
insert it into the Formula 925 Transceiver Charger cradle or into the
Formula 925/4 Multi Transceiver Charger which has been
previously connected to the power supply and to a host computer
with an available RS232, RS485 or Eavesdrop line.
The following figure describes the F925 cradle:
Key:
A) Red/Green LED:
Green = terminal not inserted or charge level being maintained
Red = charge in progress
B) RJ connector for RS485 and Eavesdrop connection
C) Power jack (9 V)
D) RJ connector for RS232 and RS485 host connection
CAUTION
A
Figure 6 - F925 Cradle Overview
The use of cradles other than those expressly
specified may damage the terminal.
B C
D
2
7