Panasonic TC-L60DT60 Serivce Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. LCD TV
  5. TC-L60DT60
  6. Serivce manual
Panasonic TC-L60DT60 Serivce Manual

Panasonic TC-L60DT60 Serivce Manual

60 inch class 1080p lcd hdtv
Hide thumbs Also See for TC-L60DT60:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
60 inch Class 1080p LCD HDTV
TC-L60DT60
Model No.
LA42 Chassis
© Panasonic Corporation 2013.
Unauthorized copying and distribution is a violation
of law.
ORDER NO.MTNC130361CE
B32 Canada: B61

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TC-L60DT60

Summary of Contents for Panasonic TC-L60DT60

  • Page 1 ORDER NO.MTNC130361CE B32 Canada: B61 60 inch Class 1080p LCD HDTV TC-L60DT60 Model No. LA42 Chassis © Panasonic Corporation 2013. Unauthorized copying and distribution is a violation of law.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 2 Warning --------------------------------------------------------------4 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices ----------4 2.2. About lead free solder (PbF) ----------------------------5 3 Service Navigation------------------------------------------------6 3.1. PCB Layout --------------------------------------------------6 4 Specifications ------------------------------------------------------7 5 Technical Descriptions------------------------------------------8 5.1.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

  • Page 4: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.

  • Page 5: About Lead Free Solder (Pbf)

    2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.

  • Page 6: Service Navigation

    3 Service Navigation 3.1. PCB Layout Board Name Function A-Board Main K-Board IR/LED/AI P-Board Power GK-Board...

  • Page 7: Specifications

    Standard Compliance ® Bluetooth Frequency Range 2.402GHz~2.480GHz • VIERA Touch Pad Controller uses Bluetooth wireless technology. Note Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. Use Panasonic 3D Eyewear supporting passive 3D system technology.

  • Page 8: Technical Descriptions

    5 Technical Descriptions 5.1. Specification of KEY for DTCP-IP, WMDRM and Widevine 5.1.1. General information: 1. NAND Flash (IC8900) for spare parts has the seed of KEY for each DTCP-IP for DLNA, WMDRM for Netflix and Widevine for CinemaNow. 2. The final KEY data will be generated by Main IC (IC8000) when SELF CHECK was done and are stored in both Main IC (IC8000) and NAND Flash (IC8900).

  • Page 9: Service Mode

    6 Service Mode 6.1. How to enter into Service Mode 6.1.1. Purpose After exchange parts, check and adjust the contents of adjustment mode. While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds. Note: Service Mode can not be entered when 3D signal input.

  • Page 10: Srv-Tool

    6.2. SRV-TOOL 6.2.1. How to access 1. Select [SRV-TOOL] in Service Mode. 2. Press [OK] button on the remote control. 6.2.2. Display of SOS History SOS History (Number of LED blinking) indication. From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment. This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory shipment setting].

  • Page 11: Hotel Mode

    6.3. Hotel mode 1. Purpose Restrict a function for hotels. Item Function 2. Access command to the Hotel mode setup menu Mode Select hotel mode On/Off In order to display the Hotel mode setup menu: Input Select input signal modes. While pressing [VOLUME (-)] button of the main unit, Set the input, when each time power is switched on.

  • Page 12: Data Copy By Usb Memory

    6.4. Data Copy by USB Memory Note: SD card can not be used for Data Copy. 6.4.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and then copy to other TVs.
  • Page 13 6.4.3. Data copy from TV set to USB Memory 1. Turn on the TV set. 2. Insert USB Memory with a startup file (pwd file) to USB terminal. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to USB Memory.
  • Page 14 6.4.4. Data copy from USB Memory to TV set 1. Turn on the TV set. 2. Insert USB Memory with Data to USB terminal. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from USB Memory to TV set.

  • Page 15: Troubleshooting Guide

    7 Troubleshooting Guide Use the self-check function to test the unit. 1. Checking the IIC bus lines 2. Power LED Blinking timing 7.1. Check of the IIC bus lines 7.1.1. How to access 7.1.1.1. Self-check indication only: Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control for more than 3 seconds.

  • Page 16: Power Led Blinking Timing Chart

    7.2. Power LED Blinking timing chart 1. Subject Information of LED Flashing timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit. Blinking Times Contents Check point...

  • Page 17: Disassembly And Assembly Instructions

    8 Disassembly and Assembly Instructions 8.1. Disassembly Flow Chart for the Unit This is a disassembly chart. When assembling, perform this chart conversely.

  • Page 18: Disassembly Procedure For The Unit

    8.2. Disassembly Procedure for the Unit 8.2.1. Pedestal 8.2.3. BT Cover 1. Lay down the unit so that the rear cover faces upward. 1. Remove the 1 screw. 2. Remove the 4 screws. 2. Remove the BT Cover. 3. Remove the pedestal. 8.2.4.
  • Page 19 8.2.5. P-Board 8.2.6. A-Board 1. Remove the 5 screws. 1. Remove the 3 screws. 2. Disconnect the connectors (P2 and P4). 2. Remove the 3 locking tabs. 3. Remove the P-Board. 3. Remove the Side AV bracket. 4. Remove the 4 screws. 5.
  • Page 20 8.2.7. K-Board 7. Disconnect the connectors (A02, A10, A12 ,A15, A16 and A20). 1. Disconnect the connector (K10). 8. Remove the A-Board. 2. Remove the 2 screws. 3. Remove the 2 locking tabs. 4. Remove the K-Board. 9. Remove the 2 screws. 10.
  • Page 21 8.2.9. Speaker 8.2.12. Metal Bracket WiFi 1. Remove the 4 screws. 1. Remove the 5 screws. 2. Remove the 2 Speakers. 2. Remove the Metal Bracket WiFi. 8.2.13. BT Dongle 1. Remove the BT Dongle. 8.2.10. Woofer 1. Remove the 4 screws. 2.
  • Page 22 8.2.16. Side Metal panel 1. Remove the 8 screws. 2. Remove 2 Side Metal Panels. 8.2.17. Top Side Metal Panel, Cabinet Assy and LCD Panel 1. Remove the 4 screws. 2. Remove the Top Side Metal Panel. 3. Remove the Cabinet Assy and LCD Panel.
  • Page 23 8.2.18. Felt, Sponge, Gasket and so on...

  • Page 28: Measurements And Adjustments

    9 Measurements and Adjustments 9.1. Voltage chart of P-board Power Supply Name Test point Spec TP7407 24±1.2V TP7410 15.7±0.6V TP7501 5.3±0.2V TP7201 or TP7202 390V ±15V *HOT 9.2. Voltage chart of A-board Power Supply Name Test point Spec PANEL12V TP4000 11.50V - 12.50V SUB5V TP5420...

  • Page 29: Block Diagram

    10 Block Diagram 10.1. Main Block Diagram MAIN SD CARD DATA SD IF SD CARD SLOT SUB5V TUNER DDR_I/F DDR3 Peaks NAND USB5V Y/PB/PR COMPONENT IN NAND_I/F FLASH CVBS IN SUB3.3V SUB1.2V L/R IN OVP DET SUB1.5 SUB5V ANALOG-ASIC STB1.1V STB1.1V DIGITAL P15V...

  • Page 30: Block (1/2) Diagram

    10.2. Block (1/2) Diagram JK3101A MAIN POWER IC7301, IC7503 STB5V IC7201, Q7301, 5.8VS T7201, Q7302 T7301 PA7406 D7102 Q7201,3 RECTIFIER +16V SRV_16V CONVERTER Q7403 D7408,9 PA7403 +16V P15V TP0002 +16V DETECT Q7402,04 D7401,2 IC7401 PC7301 PHOTO ERROR COUPLER DETCT PC7303 PHOTO COUPLER PC7302...

  • Page 31: Block (2/2) Diagram

    10.3. Block (2/2) Diagram JK8600 SPEAKER_R SPEAKER_L WOOFER SD CARD JK8601 JK8602 JK8603A D3201 JK4701 JK4702 JK4703 JK8650A FACTORY DIGITAL USB1 USB2 USB3 MAIN MAIN HDMI2 HDMI1 HDMI3 AUDIO OUT ETHERNET RF IN CN0100 IIC_0 IIC_5 IIC_1 STM_IIC SBIO,SBOO TU6706 TUNER IIC_3 IC8660...

  • Page 33: Wiring Connection Diagram

    11 Wiring Connection Diagram 11.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 11.2. Dressing Wire...
  • Page 35 Model No. : TC-L60DT60 Exploded View 1 / 1...
  • Page 36 Print Parts List Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks TXN/A1UYUUS CIRCUIT BOARD A 1 (RTL) PAVCA TXN/K1UYUUS CIRCUIT BOARD K 1 (RTL) PAVCA TXN/P1UYUU CIRCUIT BOARD P 1 (RTL) PAVCA...
  • Page 37 C 0.1UF 16V C6723 F1G1H101A834 C 100PF 50V C6724 F1G1H101A834 C 100PF 50V C6728 F1G1H102A834 C 1000PF 50V 1 PAVCA Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C6736 F1G1H101A834 C 100PF 50V...
  • Page 38 C 0.1UF 16V C8015 F1J0G2260001 C 22 UF 4 V C8017 F1J0G2260001 C 22 UF 4 V C8018 F1G1A105A047 C 1UF 10V Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C8020 F1G1C104A077 C 0.1UF 16V...
  • Page 39 C 1UF 10V C8765 F1G1A105A047 C 1UF 10V C8900 F1G1C104A077 C 0.1UF 16V C8901 F1G1C104A077 C 0.1UF 16V Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C9105 F1G1C104A077 C 0.1UF 16V...
  • Page 40 C 1UF 10V C9567 F1G1C104A077 C 0.1UF 16V C9569 F1G1C104A077 C 0.1UF 16V C9570 F1G1C104A077 C 0.1UF 16V Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C9572 F1G1A105A047 C 1UF 10V...
  • Page 41 K5E502YYA162 FUSE 1 PAVCA K1KY03BA0402 3P CONNECTOR 1 PAVCA IC4900 C1AB00003800 1 PAVCA IC4903 C1AB00003984 1 PAVCA Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks IC5000 AN34043AAVF IC5300 C0DBAYY01648 1 PAVCA...
  • Page 42 J0JYC0000464 FILTER L8751 J0JYC0000464 FILTER L9501 J0JCC0000287 CHIP INDUCTOR L9502 J0JYC0000464 FILTER L9503 J0JYC0000464 FILTER Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks L9505 G1C1R0ZA0248 INDUCTION COIL 1 PAVCA L9506 G1C3R3MA0464...
  • Page 43 R0951 D0GA101JA039 M 100 OHM, J,1/16W 1 PAVCA R0953 D0GA272JA023 M 2.7KOHM, J.1/16W R0954 D0GA272JA023 M 2.7KOHM, J.1/16W Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R0955 D0GA272JA023 M 2.7KOHM, J.1/16W...
  • Page 44 M10KOHM, J.1/16 W 1 PAVCA R4704 D0GA473JA039 M 47KOHM, J,1/16W 1 PAVCA R4705 D0GA102JA039 M1KOHM, J.1/16 W 1 PAVCA Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R4706 D0GA220JA023 M22 OHM, J.1/16 W...
  • Page 45 D0GD473JA052 M 47KOHM,J,1/8W R7320 D0GD333JA052 M 33 KOHM,J,1/8W R7321 D0GD100JA059 M 10 OHM,J,1/4W R7322 D0GD100JA059 M 10 OHM,J,1/4W Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R7323 D0GD223JA052 M 22KOHM,J,1/8W R7324...
  • Page 46 M220 OHM, J.1/16 W R8242 D0GA221JA023 M220 OHM, J.1/16 W R8243 D1BA2400A023 M 240 OHM,F.1/16 W R8244 D1BA2400A023 M 240 OHM,F.1/16 W Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R8250 D1BA2700A023 M 270 OHM,F.1/16 W...
  • Page 47 M 4.7KOHM, J,1/16W R8613 D0GA680JA023 M 68 OHM, J,1/16W R8614 D0GA680JA023 M 68 OHM, J,1/16W R8616 D0GA680JA023 M 68 OHM, J,1/16W Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R8617 D0GA103JA039 M10KOHM, J.1/16 W...
  • Page 48 M 270 OHM,F.1/16 W 1 PAVCA R9530 D1BA2700A023 M 270 OHM,F.1/16 W 1 PAVCA R9531 D1BA2700A023 M 270 OHM,F.1/16 W 1 PAVCA Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R9532 D1BA2700A023 M 270 OHM,F.1/16 W...
  • Page 49 K4AD01D00008 TERMINAL ZA0058 K4AD01D00008 TERMINAL ZA7101 K4AD01A00004 TERMINAL 1 PAVCA ZA7103 K4AD01A00004 TERMINAL 1 PAVCA Model No. : TC-L60DT60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks 10030 -0066000 BATTERY COVER 1 PAVCA EAK1H06A SPEAKER_SQ...
  • Page 50 Print Parts List XYN4+F12FJK M4X12 SEMS SCREW(BLACK) file:///C|/...VC_MTNC130361CE/viewing/SGML_VIEW_DATA/NA/TC-L60DT60/SVC/MTNC130361CE/mec2/en/html/print_all.htm[1/19/2014 3:18:39 PM]...

Table of Contents