Conair Thermal Shine 121NP Instructions

Conair Thermal Shine 121NP Instructions

Advertisement

Available languages

Available languages

Quick Links

IMPORTANT SAFETY
use attachments not recommended by the
manufacturer.
INSTRUCTIONS
4. Never operate this appliance if it has
a damaged cord or plug, if it is not
When using electrical appliances, especially when
working properly, if it has been dropped,
children are present, basic safety precautions
damaged, or dropped into water. Return
should always be followed, including the following:
the appliance to a Conair Service Center
for examination and repair.
READ ALL INSTRUCTIONS
5. Keep the cord away from heated
BEFORE USING
surfaces. Do not pull, twist, or wrap line
cord around dryer, even during storage.
KEEP AWAY FROM WATER
6. Never block the air openings of the
appliance or place it on a soft surface, such
DANGER
as a bed or couch, where the air openings
Any hair dryer is electrically
may be blocked. Keep the air openings free
live even when the switch is off.
of lint, hair, and the like.
To reduce the risk of death or injury by
7. Never use while sleeping.
electric shock:
8. Never drop or insert any object into any
opening or hose.
1. Always unplug it immediately after using.
9. Do not use outdoors or operate where
2. Do not use while bathing or in a shower.
aerosol (spray) products are being used
3. Do not place or store appliance where it can
or where oxygen is being administered.
fall or be pulled into a tub or sink.
10. Do not use an extension cord to
4. Do not place in, or drop into, water or
operate dryer.
other liquids.
11. Do not direct hot air toward eyes or other
5. If an appliance falls into water, unplug it
heat-sensitive areas.
immediately. Do not reach into the water.
12. Attachments may be hot during use.
Allow them to cool before handling.
WARNING
13. Do not place appliance on any surface while
To reduce the risk of burns,
it is operating.
electrocution, fire, or injury to persons:
14. While using the appliance, keep your hair
1. This appliance should never be left
out of it. Keep your hair away from the air
un attended when plugged in.
inlets.
2. This appliance should not be used by, on,
SAVE THESE
or near children or individuals with certain
disabilities.
INSTRUCTIONS
3. Use this appliance only for its intended
use as described in this manual. Do not
OPERATING
2. The appliance will stop working. There will be
an audible click and reset button will pop out.
INSTRUCTIONS
3. To reset ALCI, unit should be unplugged.
Then push reset button in and reinsert
This appliance is intended for household use
plug into outlet.
only. Use on Alternating Current (60 hertz) only.
Standard dryers are designed to operate at 110
Reset
to 125 volts A.C.
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature, this
Test
plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
4. If ALCI is not functioning properly, return
electrician. Do not attempt to defeat this safety
appliance to nearest service center.
feature.
5. It is important that if immersion occurs, this
IMPORTANT
unit be brought to a service center. Do not try
to reset.

1875 WATT OPERATING GUIDE

6. Be sure to repeat test every time you use the
Use of this dryer on the same circuit or fuse
unit to confirm ALCI is operational.
with other electrical products or appliances may
Should the appliance go off and the reset
trip a 15 amp circuit breaker or blow a 15 amp
button pop up during use, this could indicate a
fuse. NEVER replace the fuse with one rated
malfunction in the unit. Remove plug from outlet
higher than the capacity of the circuit. Doing
and allow the appliance to cool. Push reset
so could result in an electrical fire.
button and reinsert plug into outlet.
CHECK ALCI SAFETY FEATURE EVERY TIME
The appliance should then function normally.
YOU USE APPLIANCE
If not, return to an authorized Conair Service
Center for evaluation and repair.
This appliance is equipped with an Appliance
Leakage Circuit Interrupter (ALCI), a safety

SUPER STYLING GUIDE

feature that renders it inoperable under some
Your best looks begin with a good haircut that's
abnormal conditions, such as immersion in
well maintained. Always treat hair right with
water. To make sure the ALCI is functioning
superior quality shampoos, conditioners, and
properly, perform the following test. The pur-
finishing products.
pose of this test is to allow you to make sure
the water sensing system (ALCI) is working.
1. Plug in the appliance and press test button
on plug (see appropriate diagram below).

DRYING BASICS

BODY & VOLUME
1. Shampoo and condition hair with products of
To create extra volume, turn
your choice. Rinse thoroughly. Towel dry hair to
head upside down while drying.
remove excess moisture. Using the dryer along
Position the airflow toward the
with your styling brush, start at a lower setting
roots for maximum lift. When
and direct hot air through a section of hair at a
hair is dry, toss head back and
time. Move dryer steadily across each section
brush hair into place.
so that the hot air passes through hair. Direct air
Reset
flow at hair, not scalp. Clouds of negatively

STRAIGHTENING

charged ions will help to reduce static
Work with hair in sections
electricity, control frizzy flyaways and contribute
Test
when creating a super–
to your hair's shine.
straight look. Use the
2. Keep dryer's air intake vents unobstructed and
smoothing comb for a sleek
free from hair while drying.
look leaving your hair
3. To avoid over-drying, do not concentrate heat
straighter, silkier and shinier.
on any one section for a length of time. Keep
dryer moving as you style.

MAKING WAVES

4. For quick touchups between shampoos,
dampen hair with a mist of water before styling
Tousled, natural-looking waves
with the dryer.
are easily created by grasping
hair at the roots and
5. When using your dryer to create curls and
scrunching between fingertips
waves, dry hair almost completely on a
while drying.
warmer temperature setting, then finish
styling with cool shot feature to close hair
shaft and lock in style.

GETTING TO KNOW YOUR DRYER

The Conair
®
1875 Watt Thermal Shine Styler
is very effective, even at lower temperatures,
and helps create healthier-looking, shiny, more
manageable hair with maximum styling control.
1875 watts

Ionic conditioning

IONIC CONDITIONING Natural ion output
helps to control static electricity minimizing
frizz, increasing shine and making hair
more manageable.
select your setting
Removable filter
Cool shot button
sPEEd/TEmP
HAIR TYPE
3 heat settings
low/warm
delicate & thin
low/hot
average to thick
high/warm
thick or wav y
2 speed settings
high/hot
hard-to-style
Hang ring
Smoothing Comb
Concentrator
Diffuser
Concentrator

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Thermal Shine 121NP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Conair Thermal Shine 121NP

  • Page 1 CHECK ALCI SAFETY FEATURE EVERY TIME The appliance should then function normally. 12. Attachments may be hot during use. YOU USE APPLIANCE If not, return to an authorized Conair Service Allow them to cool before handling. WARNING Center for evaluation and repair.
  • Page 2 GARANTÍA LIMITADA DE DOS AÑOS ¡SI DEBE USAR EL SECADOR EN EL CUARTO DE BAÑO, INSTALE UN GFCI* AHORA! Conair reparará o remplazará (a su opción) su NUNCA jale, retuerza ni doble mucho el cable. SECADOR DE 1875 VATIOS DE MANTENIMIENTO Su electricista le puede ayudar a decidir cual aparato sin cargo por un período de 24 meses a...

Table of Contents