Key Features And Functions - DeWalt DC900-XE Instruction Manual

C
D
FIG. 1
B
A

KEY FEATURES AND FUNCTIONS

Variable Speed Switch (Fig. 1)
To turn the tool on, squeeze the trigger switch (A). To turn the tool off, release the
trigger switch. Your tool is equipped with a brake. The chuck will stop as soon as the
trigger switch is fully released.
NOTE: Continuous use in variable speed range is not recommended. It may damage
the switch and should be avoided.
FIG. 1 FIG. 2
F
D
C
E
Forward/Reverse Control Button (Fig. 1)
A forward/reverse control button (B) determines the direction the tool will spin and
also serves as a lock-off button.
To select forward rotation, release the trigger switch and depress the forward/reverse
control button on the right side of the tool.
To select reverse, depress the forward/reverse control button on the left side of the
tool.
The center position of the control button locks the tool in the off position. When
changing the position of the control button, be sure the trigger is released.
NOTE: The first time the tool is run after changing the direction of rotation, you may
hear a click on start up. This is normal and does not indicate a problem.
Mode Control Collar
Your drill is equipped with a separate mode control collar (Fig. 1, C) to switch
between drilling and screwdriving.
7
FIG. 3
D
F
C
E