Download Print this page

Advertisement

Quick Links

Shibuya-ku, Tokyo 151-8543, Japan
© 2013 CASIO COMPUTER CO., LTD.
MA1302-EA
• Be sure to keep all user documentation handy for future reference.
• Your watch may differ somewhat from the one shown in the illustration.
• After the day of the week changes, rotate the crown towards you to return to
approximately 11:00 p.m.
• Turn the crown away from you again so the time setting changes from 11:00
p.m. to 4:00 a.m. to advance to the next day of the week.
• Repeat the above steps as many times as necessary to set the day of the
week you want.
3. After setting the day of the week, set the hands by rotating the crown.
Move the minute hand four or fi ve minutes past the time you want to set, and
then back it up to the proper setting.
• Carefully set the time, making sure to distinguish between AM and PM.
4. Push the crown back in to the normal position to restart timekeeping.
To set the day
1. Pull the crown out to the fi rst click.
2. Set the day by rotating the crown towards you (in the
direction indicated by the arrow in the illustration).
3. Push the crown back in to the normal position.
• Avoid changing the day setting while the current time is
between 9:00 p.m. and 1:00 a.m.
■ For a watch with an elapsed time bezel
Rotate the elapsed time bezel to align the
minute hand.
After certain amount of time elapsed, read the graduation on
the elapsed time bezel which the minute hand points to.
The elapsed time is indicated.
• Some water resistant models are equipped with a screw
lock crown.
• With such models, you must unscrew the crown in the
direction noted in the illustration to loosen it before you can
pull it out. Do not pull too forcibly on such crowns.
• Also note that such watches are not water resistant while
their crowns are loosened. Be sure to screw the crowns
back in as far as they will go after making any setting.
Accuracy at normal temperature: ± 20 seconds a month
Display: 3 analog hands (hour, minutes and seconds),
3 dials (24-hour, day and day of the week)
Battery: One silver oxide battery (Type: SR920SW)
Approximately 3 years on type SR920SW

Operating Precautions

Water Resistance
• The following applies to watches with WATER RESIST or WATER RESISTANT marked
on the back cover.
On watch front or on
Marking
back cover
Hand washing, rain
Water-related work,
Example
swimming
of Daily
Use
Windsurfi ng
Skin diving
• Do not use this watch for scuba diving or other types of diving that requires air tanks.
• Watches that do not have WATER RESIST or WATER RESISTANT marked on the back
cover are not protected against the effects of sweat. Avoid using such a watch under
conditions where it will be exposed to large amounts of sweat or moisture, or to direct
splashing with water.
• Even if a watch is water-resistant, do not operate its buttons or crown while it is
submersed in water or wet.
• Even if a watch is water-resistant, avoid wearing it in the bath or in areas where
detergents (soap, shampoo, etc.) are being used. Such conditions can reduce water
resistance.
• After submersion in seawater, use plain water to rinse all salt and dirt from the watch.
• To maintain water resistance, have the gaskets of your watch replaced periodically
(about once every two or three years).
• A trained technician will know how to check your watch for proper water resistance
whenever you have its battery replaced. Battery replacement requires the use of
special tools. Always request battery replacement from your original retailer or from an
authorized CASIO Service Center.
• Some water-resistant watches come with fashionable leather bands. Avoid swimming,
washing, or any other activity that causes direct exposure of a leather band to water.
• The inside surface of the watch glass may fog when the watch is exposed to a sudden
drop in temperature. No problem is indicated if the fogging clears up relatively quickly.
If the fogging does not clear or if water has gotten into the watch, take it in for repair
immediately.
• Continued use of the watch with water inside can result in damage to electronic and
mechanical components, the face of the watch, etc.
• Your water-resistant watch has been tested in accordance with the International
Organization for Standardization regulations ISO2281 and FTC (USA) "GUIDE FOR
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Operation Guide 4752/5353
ENGLISH
To set the day of the
week and the time
1. Pull the crown out to the
second click when the second
hand is at 12 o'clock position.
This will cause the second
hand to stop.
2. Rotate the crown to change the
day of the week setting. The
day of the week changes when
the time setting advances from
11:00 p.m. to 4:00 a.m. You
can perform the following steps
to set the day of the week you
want more quickly.
• Turn the crown away from
you so the time setting
changes from 11:00 p.m. to
4:00 a.m., which advances
the day of the week.
mark with the
Elapsed time bezel
Specifi cations
Water
Enhanced Water Resistance Under Daily Use
Resistance
5
10
Under Daily
Atmospheres
Atmospheres
Use
No
5BAR
10BAR
BAR mark
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
No
No
Yes
Printed in China
Imprimé en Chine
MA1302-A
Magnetism
• The hands of analog and combination (analog-digital) watches are moved by a motor
that uses magnetic force. When such a watch is close to a device (audio speakers,
magnetic necklace, cell phone, etc.) that emits strong magnetism, the magnetism can
cause timekeeping to slow down, speed up, or stop, resulting in the incorrect time
being displayed.
Electrostatic Charge
• Exposure to very strong electrostatic charge can cause the watch to display the wrong
time. Very strong electrostatic charge even can damage electronic components.
Chemicals
• Do not allow the watch to come into contact with thinner, gasoline, solvents, oils, or
fats, or with any cleaners, adhesives, paints, medicines, or cosmetics that contain
such ingredients. Doing so can cause discoloration of or damage to the case, resin
band, leather band, and other parts.
Storage
• If you do not plan to use the watch for a long time, wipe it thoroughly free of all dirt,
sweat, and moisture, and store it in a cool, dry place.
Resin Components
• Allowing the watch to remain in contact with other items or storing it together with
other items for long periods while it is wet can cause the color of the other items to
transfer to the resin components of the watch. Be sure to dry off the watch thoroughly
before storing it and make sure it is not in contact with other items.
• Leaving the watch where it is exposed to direct sunlight (ultraviolet rays) for long
periods or failure to clean dirt from the watch for long periods can cause it to become
discolored.
• Friction caused by certain conditions (frequent external force, sustained rubbing,
impact, etc.) can cause discoloration of painted components.
• If there are printed fi gures on the band, strong rubbing of the printed area can cause
discoloration.
• Failure to clean dirt from the watch for long periods can cause fl uorescent color to
fade. Wash dirt off with water as soon as possible and then dry the watch.
• Semi-transparent resin parts can become discolored due to sweat and dirt, and if
exposed to high temperatures for long periods.
• Contact an authorized CASIO Service Center to have resin components replaced. Note
that you will be charged for replacement costs.
Natural Leather and Imitation Leather Bands
• Allowing the watch to remain in contact with other items or storing it together with
other items while it is wet for long periods can cause the color of the other items to
transfer to the natural leather or imitation leather band of the watch. Be sure to dry
off the watch thoroughly before storing it and make sure it is not in contact with other
items.
• Leaving a leather band where it is exposed to direct sunlight (ultraviolet rays) for long
periods or failure to clean dirt from a leather band for long periods can cause it to
become discolored.
Important!
• Subjecting a natural leather or imitation leather band to rubbing or dirt can cause color
transfer and discoloration.
Metal Components
• Failure to clean dirt from a metal band can lead to formation of rust, even if the band is
stainless steel or plated. If the watch is exposed to sweat or water, wipe it thoroughly
with a soft, absorbent cloth and then store it in a well-ventilated location to dry.
• To clean the band, use a soft toothbrush or similar tool to scrub it with a weak solution
of water and a mild neutral detergent. Take care to avoid getting solution on the watch
case.
Bacteria and Odor Resistant Band
• The bacteria and odor resistant band protects against odor generated by the formation
of bacteria from sweat, which ensures good comfort and hygiene. In order to ensure
maximum bacteria and odor resistance, keep the band clean. Use an absorbent soft
cloth to wipe the band clean of dirt, sweat, and moisture. The bacteria and odor
resistant band suppresses the formation of organisms and bacteria. It does not protect
against rash due to allergic reaction, etc.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage
or loss suffered by you or any third party arising through the use of this product or its
malfunction.

User Maintenance

Caring for Your Watch
• A dirty or rusty case or band can soil the sleeve of your clothing, cause skin irritation,
and even interfere with watch performance. Be sure to keep the case and band clean
at all times. Rust tends to form easily after the watch is exposed to seawater and then
left without cleaning.
• Sometimes a smudge like pattern may appear on the surface of a resin band. This will
not have any affect on your skin or clothing. Wipe the band with a cloth to clean it.
• Keep a leather band clean by wiping it with a dry cloth. Both resin bands and leather
band can become worn and cracked over time when subjected to normal daily use.
• Should your band become badly cracked or worn, be sure to have it replaced with a
new one. Request band replacement from your original retailer or an authorized CASIO
Service Center. Note that you will be charged for band replacement costs, even if your
watch is still covered by its warranty.
• Remember that you wear your watch next to your skin, just like a piece of clothing.
20
Because of this, you should always keep your watch clean. Use a soft, absorbent cloth
Atmospheres
to wipe off any dirt, sweat, water, or other foreign matter from the case and band.
Dangers of Poor Watch Care
20BAR
Rust
Yes
• Though the stainless steel used for the watch is highly rust-resistant, rust can form if
the watch is not cleaned after it becomes dirty. Failure of oxygen to come into contact
Yes
with the metal because it is dirty causes breakdown of the oxidization layer on the
metal surface, which leads to the formation of rust.
Yes
• Even if the surface of the metal appears clean, sweat and rust in crevasses can soil the
Yes
sleeves of clothing, cause skin irritation, and even interfere with watch performance.
Premature Wear
• Leaving sweat or water on a resin band or storing it an area subject to high moisture
can lead to premature wear, cuts, and breaks.
Skin Irritation
• Individuals with sensitive skin or in poor physical condition may experience skin
irritation when wearing a watch. Such individuals should keep their leather band or
resin band particularly clean, or switch to a metal band. Should you ever experience
a rash or other skin irritation, immediately remove the watch and contact a skin care
professional.
Battery Replacement
• Leave battery replacement up to your original retailer or authorized CASIO Service
Center.
• Have the battery replaced only with the type specifi ed by in this manual. Use of
another type of battery can cause malfunction.
• When replacing the battery, also request a check for proper water resistance. Note that
you will be charged separately for water resistance inspection.
Initial Battery
• The battery that comes loaded in your watch when you purchase it is used for function
and performance testing at the factory.
• This type of test battery may go dead quicker than the normally rated battery life
as noted in the User's Guide. Note that you will be charged for replacement of this
battery, even if replacement is required within the watch's warranty period.
Low Battery Power
• Low battery power is indicated by large timekeeping error, when display contents are
dim, or when the display does blank.
• Después que cam
vuelva a indicar ap
• Vuelva a girar la c
11:00 p.m. a 4:00
• Repita los pasos a
día de la semana
3. Tras ajustar el día d
Mueva la manecilla
desde la posición d
apropiado.
• Ajuste la hora aten
4. Regrese la corona a
hora.
Para ajustar el d
1. Tire de la corona ha
2. Ajuste el día hacien
dirección indicada p
3. Regrese la corona a
• Evite cambiar el ajus
1:00 a.m.
■ Para un reloj con el aro
Gire el aro biselado de
marca
con la mane
Luego de una cierta ca
graduación sobre el ar
que apunta la manecill
Se indica el tiempo tra
• Algunos modelos res
corona con seguro e
• Con tales modelos, d
dirección indicada en
de que pueda extrae
forzando tales tipos
• También tenga en cu
resistentes al agua m
Asegúrese de enrosc
en toda su extensión
Precisión a la temperatu
Display: 3 manecillas an
3 esferas (24 ho
Pila: Una pila de óxido d
Aproximadamente 3 añ
Precauciones de fu
Resistencia al agua
• Lo siguiente correspond
RESISTANT (resistente
En el frente del re
Marca
en la cubierta po
Lavado de mano
lluvia
Ejemplo
Trabajo relaciona
de uso
con agua, nataci
diario
Práctica de wind
Buceo de superfi
• No utilice el reloj durant
que requiera botellas de
• Los relojes que no pose
cubierta posterior no es
circunstancias donde q
a salpicaduras de agua
• Aun si el reloj es resiste
mientras está sumergid
• Aun si el reloj es resiste
detergentes (jabón, cha
agua.
• Después de sumergirlo
suciedad del reloj.
• Para mantener la resiste
periódicamente (aproxim
• Siempre que haga reem
comprobaciones neces
la pila es necesario utili
original o un Centro de
• Algunos relojes resisten
lavar o realizar cualquie
directo con agua.
• La superfi cie interior de
expuesto a una caída b
relativamente rápido no
ingresado agua dentro d
• El uso continuo del relo
componentes electrónic
1
• Su reloj resistente al ag
la Organización Internac
INDUSTRIA RELOJERA
Correa
• Si ajusta demasiado la
de aire por debajo de e
correa. Entre la correa y
pueda introducir un ded
• El deterioro, el óxido o c
en cuyo caso el reloj se
correa y mantenerla lim
otro problema con la co

Advertisement

loading

This manual is also suitable for:

5353