Table of Contents
Advertisement
(1) "Page": Page to read or write to (0~9).
(2) "Read": Read data from specified page.
(3) "Write": Data to write to specified page.
(4) "Sync": Copy data from block (5) to block (6).
(5) Displays the output data when Read function is executed.
(6) Contains the input data when Write function is executed.
(7) "Status": Shows the read status as either Read-only or Write/Read.
(8) "Write Enable": Change status to Write Enable.
Revised May, 2012
(If read successful then block (5) will display 16 binary 0~F hexadecimal
values)
Step 1:
In block (6), please fill in the desired 16 binary 0 ~ F hexadecimal
values.
Step 2:
Check "Write Enable" and Status bar will now display
"Write/Read".
Step 3:
Click on "Write" to write data.
Chapter 3 Using EzDMC | PCI-DMC-A01 / PCI-DMC-B01
3-11
Advertisement
Table of Contents
