INSTALLATION THANK YOU for purchasing a JBL CS Series amplifier. In order that we may better serve you should you require warranty service for your new amplifier, please retain your original purchase receipt and register your new JBL amplifier online at www.jbl.com.
Figure 1. Terminal connection end plate for CS300.1. Figure 2. Terminal connection end plate for CS60.4. Figure 3. Terminal connection end plate for CS60.2.
Page 4
To the right are two application diagrams to help plan your subwoofer system installation. Figures 4 and 5 show how to configure the CS300.1 subwoofer amplifier. NOTE: For simplicity, Figures 4 and 5 do not show power, remote and input connections.
Page 5
APPLICATIONS – CS60.4 The CS60.4 can be set up for stereo Front Left 4-channel, 3-channel or bridged 2-channel operation, as shown in Figures 6 through 8. NOTE: For simplicity, Figures 6 through 8 do not show power, remote and input connections.
Page 6
APPLICATIONS – CS60.2 Figure 9. CS60.2 used in 2-channel (stereo) Left Right operation to drive a set of full-range speakers. Left Right Figure 10. CS60.2 used in bridge mode to drive a subwoofer.
CONTROLS AND SETUP SETTING THE SETTING INPUT CROSSOVER(S) SENSITIVITY Determine your system plans and set 1. Initially turn the INPUT LEVEL control(s) the crossover mode switch accordingly. to minimum (counter clockwise). If your system design does not include 2. Reconnect the (–) negative lead to the a subwoofer with the CS60.4, set the vehicle’s battery.