Advertisement
Cocking
Pull cocking knob to rear and release. Bolt will remain
open.
Cocking knob has a spring return and will return forward
after release.
Cocking knob is non-reciprocating and will remain forward
when firing.
Note:
Cocking assembly may slightly bind when first used. With
use and lubrication, it will feel smoother.
If gun jams with the bolt forced closed, do not force the
cocking knob or hit it with a hammer. Remove upper
receiver from lower receiver. Use a screw driver to to
depress the rear of the extractor and release the case rim.
Remove the bolt assembly, then use a cleaning rod or
dowel from the muzzle end to tap the bullet out.
Recommended source for magazines:
Centerfire Systems
Part Number #M31DRUM
Condition of magazines- magazines are of varying quality
due to the fact that they are surplus military magazines.
Steel surface may show pitting, wear marks or light
scratches. Magazine is coated with grease. Make sure
you clean the inside thoroughly before loading.
Advertisement
