Dial Lock - Panasonic KX-TS840MX Operating Instructions Manual

Making/Answering Calls
transferring an extension call, or
accessing optional telephone services.
Flash time
The flash time depends on your
telephone exchange or host PBX. The
default setting is 600ms.
1
Lift the handset.
2
MPROGRAMN
R Status indicator light will start
double flashing at an interval.
3
MHOLD/MODEN ® M2N
4
Press M0N to M9N or MGN to select the
desired setting.
M1N: M2N:
80ms 90ms
M4N: M5N:
110ms 160ms
M7N: M8N:
250ms 300ms
MGN: M0N:
600ms 700ms
5
MPROGRAMN
R A long beep sounds.
R Status indicator light will turn OFF.
6
When finished, hang up.
For call waiting service users
To use call waiting, you must first
subscribe to the call waiting service of
your service provider/telephone
company. This feature allows you to
receive calls while you are already
talking on the phone. If you receive a
call while on the phone, you will hear a
call waiting tone.
1
Press MFLASHN to answer the 2nd
call.
2
To switch between calls, press
MFLASHN.
10
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Temporary tone dialing (for
rotary/pulse service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch-tone services (for example,
answering services, telephone banking
services, etc.). Press MGN (TONE)
before entering access numbers which
require tone dialing.
M3N:
100ms

Dial lock

M6N:
This feature prohibits making outside
200ms
calls. The default setting is OFF.
M9N:
Important:
400ms
R When dial lock or call restriction
(page 15) is turned on, only phone
number stored in the memory of the
MEMERGENCYN can be dialed (only 1
one-touch dial).
R When dial lock is turned on, you can
still adjust the handset volume and
answer the second call by pressing
MFLASHN.
R When dial lock is turned on, you
cannot store or erase the emergency
numbers in the MEMERGENCYN.
To turn the dial lock on/off
1
Lift the handset.
2
M DIAL LOCK/EXITN
R Status indicator light will start
double flashing at an interval.
3
Enter the unit password (default:
1111) ® M DIAL LOCK/EXITN
R A long beep sounds.
R Status indicator light will turn OFF.