Page 1
GPS Portable Navigation Device Lx340 User Manual...
Page 2
The navigation software and mapping data is provided by MapmyIndia. Its copyright is protected by laws. A User can only use on this device, any copying or application of the software for other purpose is not allowed.
Page 3
General tips for GPS application The following content is tips for GPS device application and operation. Please read it before starting use of the GPS device, so that you may make a better use of the GPS device. While the GPS device is working, it receives signal from satellites for positioning.
Page 4
Warnings: Please install the device in a right way to avoid driver's sight and airbag to be hindered. Any loss or damage of product, passengers, or other property caused by mistakes of mounting or installing of the device will be not covered within the warranty and not be the responsibility of the manufacturer.
Page 5
Never use wet hands to pull out or plug in the power plug to avoid possible electric shock Not use the device in an environment over 60℃, or below -10℃, and with high humidity as well. Considering the hot weather conditions in India especially during summer, when car is parked which means AC in car is also not operative, the temperature inside in car easily goes above 55C.Keeping the device at such...
Table of Contents 1.0 Understanding Hardware Features…………………………………………………………. 7 2.0 Illustrations on screen display..................8 2.1(Projector Screen)......................8 2.2 Secondary UI (Projector Screen)................. 8 3.0 Multimedia…………………………………………………………………………….... 9 3.1 Flash Playback......................9 3.2 Video Playback......................10 3.3 Music Playback………………………………………………………………………………. 11 3.4 Button and control in Play Mode…………………………………………………………... 12 3.5 Exit from Music play…………………………………………………………………………...
Getting Started 1.0 Understanding Hardware Features Front Components Component Description Touch Screen Displays t h e o u t p u t your device T a p t h e S c r e e n with your fingertip to select menu Back Components Component Description...
Top Components ON/OFF Component Description On/Off Switch The main power/battery cut off switch 2.0 Illustrations on screen display: System UI 2.1(Projector Screen)* Under this UI, click icon down the screen to enter the function page. Then there will be Looped playback of cartoon, click it to entry this function.
In this interface, click the icons on the screen to enter the corresponding functions; and click the arrow on the right bottom to turn the page. There will be an animation effect when turning the page. 3.0 Multimedia 3.1 Flash Playback This is to play flash in your PND.
Control buttons in playing mode: :Play, in Pause or Stop mode, press this button to play; :Pause, in Play mode, pressing this button to pause; :Stop, in Play mode, pressing this button to stop; :Fast Forward, in Play mode, pressing this button to get fast forward once; :Fast Retreat, in Play mode, pressing this button to fast retreat once;...
UI and button definition: Play Next Pause Previous Stop Full screen display Close Play Progression, drag to a point to start play Volume tune, click anterior to set into mute status, click it again to resume In full screen display, the tool bar at screen bottom will be hidden, you can slightly tap on screen to get it.
folder; click button to close this window and exit music play mode; double click, or select then click button to play this music file. Music play mode is displayed as following diagrams: 3.4 Button and control in Play Mode: In music play mode, click button to pause, then it becomes Play Button ;...
On this UI, click button to search photo files not listed in the appointed photo file folder; click button to close current UI and exit Photo Display function; double click or select then click button to open or play this file. Display shown as the right illustration: Then, click button to select previous or next photos;...
when the GPS navigation equipment is receiving the geosynchronous satellite signal. This is called “Ephemeris”. An ephemeris covers a range of 300KM. When you have set the “Ephemeris” in place A and shut down the equipment to take it beyond 300KM, the equipment will be in another ephemeris, and start searching for the satellite to ascertain the ephemeris.
6.1 Language Setting This is for setting of system language; screen display is shown as the illustration below: Click the icons of the corresponding language in this interface or choose the interface project, the system will save the setup automatically when the setup is closed, and return to the previous menu.
6.3 Power Management This is for setting auto power off and/or power saving mode, and time to start power off and/or power saving when no operation on the device. In drag menu to select time, select “No” for disabling this feature. After setting, close the current window to save.
"Nand Flash" is the inside memory of the device, "SDMMC" is the SD card. So the start-up music can be selected from both of them. Select one,click the button to confirm, then back to the upper-level interface. 6.5 Time Setting This is for setting time of the system.
On this UI, use stylus to tap at the center of the cross, then tap on other crosses which will move after each tapping until finish and “Touch Screen Calibration Completed” is shown. 7.0 USB This is to set the mode when the USB interface of the device is connected to the computer, in which “U disk”...
will be available after you enter the game. 9.0 eBook Reading This if for eBook Reading with format .txt stored in an SD card. Operation: On system main menu, click button to enter into eBook Reading application. Display of UI for file selection: On this menu, click button to search for txt files not in selected folder;...
Click button to set a bookmark for the current page. Directly click selected bookmark stored in the dialogue block to remove this bookmark; click button to jump to the bookmarked page. Click button to exit bookmark setting and return back to eBook Reading mode.
Warnings for charging: 1. A new battery may be empty and not charged before you get the device. 2. To achieve the best performance of the battery, it is better to charge it up to 8 hours in the first three times, but not over 16 hours. 3.
as follows: In this UI click the button will be in sleeping mode, click the button will power off; click the button to exit the UI and back to normal operation. 11.5 Waking -up from the sleeping When in sleeping mode, a short press on the power-on button of the device will wake up the system.
Trouble Shooting Steps Fault Possible Cause Solutions No power on Battery drained (The screen Please refer to the description of has no further display after a battery charging in this manual, blink when pressing power only use the enclosed charger to on button.) charge the device.
Need help?
Do you have a question about the Lx340 and is the answer not in the manual?
Questions and answers