Panasonic Diga DMR-HWT230 Operating Instructions Manual page 77

Clock
If the time is not set correctly, use the settings
listed in the method below.
• Automatic
This unit usually obtains time and date
information from digital broadcasts.
• Time Zone
When the time is not correct, set "Time Zone".
(GMT - 6 to + 6)
• Manual Setting
1 Select "Off" of "Automatic", then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the
settings.
Owner ID
In order to prevent another person from using this
unit if it is stolen, you can set a PIN and input
your personal information (NAME, HOUSE NO,
POSTCODE).
Once the PIN has been set, you cannot return
to the factory preset. Make sure not to forget
this.
PIN Entry
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number
buttons.
2 Enter the new 4-digit PIN with the number
buttons.
• Make a note of PIN in case you forget it.
e.g.,
PIN Entry
Remember the PIN.
0 0 0
OK
3 Press [OK].
0
System Update
Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (
downloaded automatically at the time you
have specified.
Software Update Now ( Broadcast )
Refer to "Software (Firmware) Update".
( 78)
Software Update Now ( Internet )
Refer to "Software (Firmware) Update".
( 78)
Software Licence
Information about the software licence is
displayed.
System Information
Display Software (firmware) version, HDAVI
Control version, Wireless Module version (When
using wireless connection only), and terminal ID
(ESN) of this unit.
Initialize
Shipping Condition
All the settings except for some settings return
to the factory preset.
• The timer recording programmes are also
cancelled.
• The device password is also initialized.
( 75)
Default Settings
All the settings other than the tuning settings,
clock settings, parental control settings,
remote control code, device password, etc.
return to the factory presets.
Convenient functions
78) are
77
VQT4W79