Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Küppersbusch WT1458.0W-CN
Summary of Contents for Küppersbusch WT1458.0W-CN
- Page 1 User manual Washer-dryer WT1458.0W-CN...
-
Page 2: Table Of Contents
Contents Safety information Helpful hints and tips Product description Drying Hints Control panel Care and cleaning First use What to do if… Personalization Technical data Daily use Installation Washing programmes Electrical connection Drying Programmes Subject to change without notice Safety information Important! Read carefully &... - Page 3 this is not adhered to. See relevant sec- check with the manufacturer of the item tion in the user manual. before washing in a domestic machine. • After having installed the appliance, • The users should always check that they check that it is not standing on the inlet have not left their gas lighters (disposable and drain hose and the worktop is not...
-
Page 4: Product Description
To disable this device and restore the possibility of closing the door, rotate the button counterclockwise until the groove is vertical. Product description Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Its new washing system allows to- tal use of detergent and reduces water consumption so saving energy. -
Page 5: Control Panel
Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain re- mover used during the stain action phase (if available). The prewash and soak detergent is added at the beginning of the wash pro- gramme. The stain remover is added dur- ing the stain action phase. - Page 6 Easy Iron Delicates Cup- Extra Dry board dry Wool Hand- Prewash Extra wash Rinse Cold Rinses Start Door Drain Spin Pause Lock Delay Rinse Start Hold Child Iron Dry Lock Programme selector dial, spin speed button and available options Programme Selector Dial Prewash It allows you to switch the appliance on/off By selecting this option the machine per-...
-
Page 7: First Use
Display and minutes. After the programme has started, the time remaining is updated every minute. • Delayed start The Selected delay set by pressing the relevant button appears on the display for a few seconds, then the duration of the selected programme is displayed again. -
Page 8: Daily Use
There are two different ways to set this op- To enable or disable this option press si- tion: multaneously for about 6 seconds buttons • Before pressing button 8: it will be im- 2 and 3 until the symbol 7.1 appears or dis- possible to start the machine. - Page 9 tions on the washing programme tables Select the Delay Start by pressing (see «Washing Programmes»). button 10 Turn the programme selector dial to the re- Before you start the programme, if you wish quired programme. The programme selec- to delay the start, press the button 10 re- tor determines the type of washing cycle peatedly, to select the desired delay.
- Page 10 light of the button 8 blinks 3 times and the If a programme or an option that ends with message Err is displayed for a few sec- water left in the tub has been selected, the onds. door remains locked to indicate that the water must be emptied out before opening Altering an option or a running the door.
- Page 11 Programmes» table). Every time you Note! It is possible to dry up to 4 kg of press this button the drying time in- cotton items by pressing Drying Time creases by 5 minutes. button only (see the «Drying Pro- Note! gramme»...
-
Page 12: Washing Programmes
Washing programmes Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry COTTON SPIN REDUCTION 95° RINSE HOLD Main wash - Rinses - Long spin PREWASH Maximum spin speed 1200 rpm EXTRA RINSE Max. - Page 13 Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry EASY IRON SPIN REDUCTION 40° RINSE HOLD Main wash - Rinses - Short spin PREWASH Maximum spin speed 700 rpm EXTRA RINSE Max.
-
Page 14: Drying Programmes
Programme Maximum and Minimum Temperature Cycle Description Detergent Options Maximum Spin Speed Compartment Maximum Fabrics Load Type of Laundry SPIN SPIN REDUCTION Drain and long spin Maximum spin speed 1200 rpm Max. load 6 kg Separate spin for hand washed cotton garments and after programmes with the Rinse Hold option selec- ted. - Page 15 Before loading the laundry acetic acid; treat any residual marks on white fabrics with bleach and then rinse Never wash whites and coloureds together. thoroughly. Whites may lose their «whiteness» in the Tar stains: first treat with stain remover, wash. methylated spirits or benzine, then rub with New coloured items may run in the first detergent paste.
-
Page 16: Drying Hints
• large amounts of foam form during wash- pany, or from your local authority. If the wa- ing. ter hardness degree is medium or high we suggest you to add a water softener follow- Degrees of water hardness ing always the manufacturer’s instructions. Water hardness is classified in so-called When the degree of hardness is soft, read- “degrees”... -
Page 17: Care And Cleaning
Care and cleaning Warning! You must disconnect the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. - Page 18 • The appliance makes an unusual noise because of the blockage of the drain pump. • A problem with water draining is detected (see chapter “What to do if...” for more details). Warning! 1. Disconnect the mains plug from the mains socket. 2.
- Page 19 11. Close the drain pump door. 5. Pull back the drainage duct. 6. Unscrew the filter and remove it. Warning! 7. Remove fluff and objects from the Never remove the pump cover during a pump. wash cycle, always wait until the appliance has finished the cycle, and is empty.
-
Page 20: What To Do If
When you drain the water with the emer- gency drain procedure, you must activate again the drain system: 1. Put 2 litres of water in the main wash compartment of the detergent dispens- 2. Start the programme to drain the wa- ter. - Page 21 Problem Possible cause/Solution The door has not been closed. • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. • Please check your domestic electrical installation. The main fuse has blown.
- Page 22 Problem Possible cause/Solution Too little detergent or unsuitable detergent has been used. • Increase the detergent quantity or use another one. Stubborn stains have not been treated prior to washing. Unsatisfactory washing re- • Use commercial products to treat the stubborn stains. sults: The correct temperature was not selected.
-
Page 23: Technical Data
Problem Possible cause/Solution The laundry is full of differ- The fabrics washed in the previous cycle released fluff of a differ- ent colored fluff: ent color (refer to “Fluff in the garments” in chapter “Use - Washing & Drying”). • The drying phase helps to eliminate some fluff. •... - Page 24 2. Remove the power supply cable and the draining and inlet hose from the hose holders on the rear of the appli- ance. 6. Fill the smaller upper hole and the two large ones with the corresponding plas- tic plug caps supplied in the bag con- taining the instruction booklet.
- Page 25 Angle the hose to the left or right de- pending on the position of your water tap. 3. Set the hose correctly by loosening the Rubber feet kit (4055126249) ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to Available from your authorized dealer.
-
Page 26: Electrical Connection
• In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. • Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. - Page 28 132947520-A-212011...
Need help?
Do you have a question about the WT1458.0W-CN and is the answer not in the manual?
Questions and answers