Model 99003 Class 2 Stereo Headphones with Playback Controls User Manual CAUTION This product does not have a user-serviceable battery. Please do NOT attempt to change the battery yourself. The battery used in this device may present a risk of ﬁ re or chemical burn if misused. Please avoid extreme temperatures.
FCC Information: The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FAQs ...10 Speciﬁ cations ...11 Using the Product Thank you for selecting the GE 99003 Multifunctional Stereo Headphones. These headphones provide users with the ability to receive stereo audio transmitted via Bluetooth wireless technology along with hands-free operation of Bluetooth-enabled phones.
• The red LED indicator will stay on constantly when charging. • The headphones’ red LED charging indicator will shut off automatically when the battery is fully charged. • The red LED indicator will start to ﬂ ash RED when the power is low.
• The Blue LED will blink rapidly: 3 times in 2 seconds • The standby mode allows the transmitter (phone, USB adapter, etc.) to automatically connect with the 99003 headset if the initial pairing has already been done. Please refer to the following section on “Pairing Mode”...
® answer button on the phone and talk using Bluetooth receivers and headsets.
ﬁ rst time Use the phone’s menu system to pair it with your phone if you want to be able to use your 99003 stereo headphones as a hands-free headset. ”Pairing” creates a link between a Bluetooth- enabled phone and the GE 99003 stereo headphones. It allows the phone to remember the headset’s unique Bluetooth ID.
4. Start the music playback. You should now hear the music playing from your transmitter thru the headphones. 5. If the audio source does not automatically pair to the GE 99003, turn off the GE 99003 and the transmitting device, then try again.
Power button for 3 seconds. This also puts the headphones into “Standby Mode”, allowing connection to previously paired devices. 2. Connect via your phone to the GE 99003. When you power on the GE 99003 some phones will auto connect and other phones will require you to go back to your Bluetooth settings and manually connect.
Setting Up / Prerequisite Using your Bluetooth-enabled phone’s menu, conﬁ rm that the GE 99003 headphones have been added to the “Paired Device” list and connected to your phone. Note: If you haven’t already paired the headset with the Bluetooth-enabled phone, refer to the section “Pairing the headset to a phone for the ﬁ...
2. Why can’t I create a connection to the headphones? a. Verify that the headphone batteries are fully charged. b. Check to see if the headphones are powered on and the LED indicator light is on. c. Verify that the headphones are within the speciﬁ ed range of 30 feet (10 meters) from the audio source.
Oklahoma City, OK 73114 ® The Bluetooth word mark and logos are owned by Bluetooth such marks by JASCO Inc. is under license. Other trademarks and trade names are those of their respective owners. embedded antenna Up to 30 feet in open space* 350mAH Lithium Ion Battery -10 °C ~ +55 °C...