Advertisement
Features & Benefits
SETUP
Activate Thermometer
To activate the pre-installed battery pull out the
plastic tab at the base of the thermometer. Note:
The temperature may read higher than the actual
temperature at first due to body heat from handling.
Placement for Maximum Accuracy
AcuRite products are sensitive to surrounding environmental conditions. Proper
placement of the thermometer is critical to the accuracy and performance of
this product. To ensure accurate temperature measurement, place unit out of
direct sunlight and away from any heat sources.
Mounting the Thermometer
This product is water resistant and designed for general outdoor use, however,
to extend its life place it in an area protected from direct weather elements.
Clean the area where the suction cup will be adhered with a household
cleaner. Be sure surface is free of oil, grease, dust or other matter. Moisten the
suction cup. To mount, push firmly on the thermometer, pressing it against the
mounting surface to form a strong suction. For best suction, select surface that
is hard, smooth and non-porous. Do not use suction cup on wood or plaster.
1. Suction Cup Mount
1
Rotates for versatile placement and
indoor or outdoor use.
2. Current Outdoor Temperature
3. High Temperature Record
Highest temperature recorded
over the past 24 hours
4. Low Temperature Record
2
Lowest temperature recorded
over the past 24 hours
3
5. Battery Compartment Access
4
5
3
Advertisement
