Connect The Usb Cable - Brother MFC-253CW Quick Start Manual

USB
17

Connect the USB cable

IMPORTANT
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
Connect the machine directly to your
computer.
a
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
b
Connect the USB cable to the USB socket
marked with a
USB socket inside the machine as shown
below.
MFC-253CW/255CW/257CW
USB
LAN USB
MFC-295CN
14
symbol. You will find the
c
Carefully guide the USB cable through the
trench as shown below, following the trench
around and toward the back of the machine.
Then connect the cable to your computer.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down and close the scanner cover c.
b
2
e
The installation will continue automatically.
The installation screens appear one after
another.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
®
Windows
1
3