SNOWJOE BJ601C Operator's Manual
SNOWJOE BJ601C Operator's Manual

SNOWJOE BJ601C Operator's Manual

Lithium-ion cordless blower

Advertisement

Quick Links

A Division of Snow Joe, LLC
IMPORTANT!

Safety Instructions

All Operators Must Read These
Instructions Before Use

General Power Tool Safety Warnings

m
WARNING
Read all safety warnings and all
instructions.
Failure to follow all warnings, and
instructions may result in electric shock, fire or serious injury.
Save all warnings and instructions.
FOR HOUSEHOLD USE ONLY.
WARNING!
- To reduce the risk of electric shock - Do not use
on wet condition, dry location use only. Do not expose to rain.
CAUTION!
- To reduce the risk of injury from moving parts -
remove the battery before cleaning or servicing.
WARNING!
- Do not allow to be used as a toy. Close
attention is necessary when used by or near children.
• Use only as described in this manual. Use only
manufacturer's recommended attachments.
• Do not use damaged battery. If appliance is not working
as it should, has been dropped, damaged, left outdoors,
or dropped into water, return it to a service center.
• Do not put any object into openings. Do not use with
any opening blocked; keep free of dust, lint, hair, and
anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body
away from openings and moving parts.
• Use only the charger supplied by the manufacturer to
recharge.
• For use only with LIBAT1 battery pack.
• For use only with LICHG1 charger.
WARNING!
- To reduce risk of injury to persons: Do not
recharge batteries in a confined or unvented area.
• Recharge batteries on dry location only.
• Do not smoke, strike a match, or cause a spark in the
vicinity of the battery during charging.
WARNING! - To reduce risk of injury to persons, remove
battery pack when not in use.
© 2010 by Snow Joe, LLC
All rights reserved. Original instructions.
Lithium-Ion Cordless Blower
Lithium-Ion Cordless Blower
Model No. BJ601C
To use this tool properly, you must observe all safety warnings,
assembly, operating and maintenance instructions in this
manual. Always follow regulations regarding use in the area
the tool is being used. Do not allow children, or a person
physically incapable of operating the tool. Children should
be supervised at all times if they are in the area in which the
tool is being used. It is also imperative that you observe the
accident prevention regulations in force in your area. The same
applies for general rules of occupational health and safety.
Even when the tool is used as prescribed it is not possible to
eliminate all residual risk factors. The following hazards may
arise in connection with the tool's construction and design:
• Damage from flying debris.
• Damage to eyes if effective safety glasses or shield are
not worn.
• Damage to ears if effective ear defenders are not worn.
• Injury or illness caused by inhalation of dust and debris if
breathing protection is not sufficient.
• Always remove the battery from the tool before making
any adjustments or performing maintenance.
m
WARNING
When using power tools, basic safety precautions should
always be taken to reduce the risk of fire, electric shock, and
personal injury. Always follow the safety instructions in this
manual.
1. Store tools safely. When not in use, tools should be
stored in a dry place inaccessible to children.
2. Do not force the tool. The tool will do the job better and
safer working at the rate for which it was designed.
3. Use the correct tool for the job. Do not force small
tools or attachments to do the job best handled by a
heavier duty tool. Never use a tool for a purpose other
than that for which it was intended.
4. Dress correctly. Do not wear loose clothing or jewelry.
They can be caught in moving parts. Rubber gloves
and non-slip footwear are recommended when working
outdoors. If you have long hair, wear a protective hair
covering.
5. Use safety accessories. Safety glasses and ear muffs
should always be worn.
6. Do not overreach. Keep your footing secure and
balanced at all times.
7. Look after your tools. Keep tools clean for better and
safer performance. Follow the instructions regarding
lubrication and accessory changes. Keep tool handles
SAVE THESE INSTRUCTIONS
1
Form No. SJ-BJ601C-880E
OPERATOR'S MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for SNOWJOE BJ601C

  • Page 1: Safety Instructions

    Lithium-Ion Cordless Blower Lithium-Ion Cordless Blower Model No. BJ601C Form No. SJ-BJ601C-880E OPERATOR’S MANUAL A Division of Snow Joe, LLC IMPORTANT! To use this tool properly, you must observe all safety warnings, assembly, operating and maintenance instructions in this manual. Always follow regulations regarding use in the area Safety Instructions the tool is being used.
  • Page 2: Additional Safety Rules For Blowers

    dry, clean and free from oil and grease. Additional safety rules for blowers 8. Disable idle tools. Remove the battery from the tool • The blower has been designed to clear light debris and before servicing and when the tool is not in use. leaves from hard surfaces not for clearing grassed areas.
  • Page 3: Explanation Of Symbols

    Explanation of Symbols: Symbol Description Warning - To reduce the risk of injury, user must read instruction manual. Caution Wear hearing protection. Wear eye protection. Wear breathing protection. Wear appropriate clothing Conforms to relevant standards for electromagnetic compatibility. Do not expose to rain. Keep dry Caution of flying debris Keep the bystander away.
  • Page 4: Technical Data

    Know Your Cordless Blower Due to modern mass production techniques and product testing, it is unlikely that your power tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified.
  • Page 5: Switching On And Off

    Assembly Switching ON and OFF 1. Fit a charged battery. Before using the blower familiarise yourself with all the operating features and safety requirements. 2. Hold the tool in both hands keeping moving parts away from yourself, bystanders and any other objects. Only use the blower as intended.
  • Page 6: Charging The Battery

    Electrical Safety for Charger WARNING. Do not use an extension cord. WARNING. • Power tool plugs must match the outlet. Never modify Charge indoors only. the plug in any way. Do not use any adapter plugs with WARNING. Do not throw used batteries into a fire or earthed (grounded) power tools.
  • Page 7: Model And Serial Numbers

    The battery should ideally be stored between 10ºC (50ºF) and 24ºC (75º F). Charge Position Green Light Red Light Service Free If your Cordless Leaf Blower requires service or maintenance, Charging Flash please call 1-866-766-9563 for assistance. Fully Charged Model and Serial Numbers Over Heat Warning Flash When contacting the company or reordering parts, you...
  • Page 8 Snow Joe seller. If in the event your efforts are unsatisfactory, please write to the Snow Joe Center at the above address. If you have any questions about your product warranty, please call 1-866-SNOW-JOE or visit us online at www.snowjoe.com.

Table of Contents