Bosch MM588 Operating Instructions Manual page 9

Integral 3
Commissioning
Charging the replacement battery
Place a replacement battery in the
charging holder (rear side of the
charger). Slide the battery through
the guide notches parallel to the rear
panel. Make sure that the battery
clicks into place. The charging
indicator light switches on.
Fitting the replacement battery
Place the replacement battery onto
its rear edge. Tilt it onto the handset.
Make sure that the battery clicks into
place.
Vibra battery
A Vibra battery is available for the handset. The Vibra battery serves to
vibrate the handset when a call is received. How to activate the vibration is
explained on Page 45.
The charging process is ended when the replacement battery is full. The
charging indicator light will then switch off.
If a handset is placed in the charger, the handset will be charged. The
replacement battery will not be charged during this period. The charging
indicator light remains switched off.
The battery symbol in the display will only provide a reliable indication of
the charging status once the handset has been completely charged for the
first time!
Getting to know your handset
Continued
i
9