Table of Contents
Advertisement
lifepro
is a registered trademark
®
of lifecorpproducts., All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Purchase Date ____________Serial Number (
Questions, problems, missing parts? Contact technical support department at
1-866-484-2066, 8:00 a.m. - 5 p.m., CST, Monday - Friday or www.@lifecorpproducts.com
Please have your model and serial number ready
REV2-051514
INFRARED QUARTZ FIREPLACE
located on back of unit
1
MODEL #LS2002FRP13
) __________________
Advertisement
Table of Contents
Summary of Contents for Lifepro LS2002FRP13
- Page 1 INFRARED QUARTZ FIREPLACE MODEL #LS2002FRP13 lifepro is a registered trademark ® of lifecorpproducts., All Rights Reserved. ATTACH YOUR RECEIPT HERE Purchase Date ____________Serial Number ( ) __________________ located on back of unit Questions, problems, missing parts? Contact technical support department at 1-866-484-2066, 8:00 a.m.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . -
Page 3: Package Contents
PACKAGE CONTENTS Front View Rear View TEMP UP TEMP DOWN ON/OFF PART DESCRIPTION QUANTITY Infrared Heater Remote Control Control Panel (preassembled to Infrared Heater (A)) Temperature Sensor (preassembled to Infrared Heater (A)) 3-prong Power Cord (preassembled to Infrared Heater (A)) Caster Wheels (preassembled to Infrared Heater (A)) -
Page 4: Safety Information
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product . IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO . When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: •... -
Page 5: Specifications
SAFETY INFORMATION Tip-Over Safety Feature This heater is equipped with a tip-over safety feature . Once the heater is tipped over, an internal switch will automatically shut the heater off . Once the heater is restored to an upright position, the heater will reset . -
Page 6: Frequently Asked Questions
FREQUENTLY ASKED QUESTIONS Please review these frequently asked questions on the next few pages prior to using your heater . Q. My heater emits a strange odor when I first open the box and when I turn the heater on for the first time. - Page 7 FREQUENTLY ASKED QUESTIONS Q. The temperature on my heater does not match the temperature display on my wall, or external thermostat. Why? A. This is completely normal . The temperature display on your heater may vary from the temperature display on another thermostat (like the one mounted to your wall or a purchased external thermostat) . This is because the temperature sensor on the heater reads the temperature directly around the heater .
-
Page 8: Preparation
PREPERATION Place the heater on a firm, level surface and plug into a grounded 120 V, 60 Hz power outlet . Only operate heater in upright position . Insert two AAA batteries into the remote control before using (batteries not included) . Please note that infrared heaters do not heat like a traditional space heater . -
Page 9: Control Panel
CONTROL PANEL PART NAME DESCRIPTION Mode Button Toggles between High and Low modes High Heat indicator Indicates when High Heat mode is on Digital Display Readout of the set room temperature or timer value Celsius Indicator Light Indicates that the temperature is being displayed in Celsius C/F Button Toggles between celsius and fahrenheit Fahrenheit Indicator Light... -
Page 10: Remote Control
REMOTE CONTROL TEMP UP TEMP DOWN ON/OFF PART NAME DESCRIPTION LED Indicator Light Illuminates when any button is pressed on the remote control Heater Mode Button Toggles between the two heat modes available Temp Down Button Decreases the set temperature value Temp Up Button Increases the set temperature value Dimmer Button... -
Page 11: Operating Instructions
OPERATING INSTRUCTIONS 1 . Turn the heater on or off by pressing the Power button on the control panel (C) or by pressing the ON/OFF button on the remote control (B) . Once the power is off, heating elements will stop working first . - Page 12 OPERATING INSTRUCTIONS 4 . To power on or adjust the flame effect brightness, press the Dimmer button on the control panel (C) or remote control (B) Note: The flame effect function can be set when the heater is in the on or off mode . The unit will cycle between, high, medium, low and off brightness levels 5 .
-
Page 13: Care And Maintenance
CARE AND MAINTENANCE WARNING: Before performing any maintenance task, unplug the unit, and allow it to cool completely . 1 . To keep the heater clean, clean the outer shell with a soft, damp cloth . Use a mild detergent if necessary . -
Page 14: One-Year Limited Warranty
ONE-YEAR LIMITED WARRANTY The manufacturer warrants this heater against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase . Your sales receipt showing the date of purchase of the product is your proof of purchase . Keep it in a safe place for future reference . This product is made with the highest quality materials and is warranted to be free from defects in materials and workmanship at the time of purchase . -
Page 15: Replacement Parts List
POBO-F Tip-over switch TIPSW Spindle Motor SMOTOR Manual Thermostat LIMITSW Infrared tube QUAR-R3 Thermostat Wire SENSOR Remote control REMO-F PLEASE REMEMBER TO REGISTER YOUR WARRANTY: Registration@lifecorpproducts.com Printed in China lifepro is a registered trademark ® of lifecorpproducts., All Rights Reserved.