Table of Contents
Advertisement
Wyrestorm Extender Set
Solutions
Please read these instructions carefully before installing to avoid complications later.
Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343
Part Number
EX-1UTP-IR-100-EDID
EX-1UTP-IR-100-POH
Part Number
HDMI® Extension over Cat5e/6/7 with Full HDBaseT™
up to 100m incl. bidirectional IR control, RS232 1:2
HDMI splitting capabilities, EDID management and
Power-over-HDBaseT*
Instruction Manual
Thank you for choosing this Wyrestorm product.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wyre Storm EX-1UTP-IR-100-EDID
Summary of Contents for Wyre Storm EX-1UTP-IR-100-EDID
- Page 1 Part Number EX-1UTP-IR-100-EDID EX-1UTP-IR-100-POH Part Number HDMI® Extension over Cat5e/6/7 with Full HDBaseT™ up to 100m incl. bidirectional IR control, RS232 1:2 HDMI splitting capabilities, EDID management and Power-over-HDBaseT* Wyrestorm Extender Set Solutions Instruction Manual Thank you for choosing this Wyrestorm product.
-
Page 2: Table Of Contents
Safety Precautions control up to 100m (328ft) via single category cable, regardless of HDCP source encryption. Packaging Contents Panel Descriptions The EX-1UTP-100-POH and EX-1UTP-IR-100-EDID extenders retain the rock-solid reliability of HDBaseT™ EX-1UTP-IR-100-POH Transmitter transmission technology with bidirectional control of Receiver... -
Page 3: Features
extender sets. • Reads and copies EDID from connected devices with additional EDID configuration through customisable DIP switch settings if necessary. Features Safety Precautions • 2k resolution supported. Safety Precautions • Fully 3D compatible – Frame sequential 3D (Blu-ray) and interlaced stereoscopic 3D (satellite broadcasts etc.) •... -
Page 4: Ex-1Utp-Ir-100-Poh Transmitter
Package Contents EX-1UTP-IR-100-EDID EX-1UTP-IR-100-POH • 1 x Wyrestorm TRANSMITTER • 1 x Wyrestorm TRANSMITTER • 1 x Wyrestorm RECEIVER • 1 x Wyrestorm RECEIVER • 1 x Printed installation guide (also downloadable from • 1 x Printed installation guide (also downloadable from... -
Page 5: Ex-1Utp-Ir-100-Poh Receiver
HDMI output TCP/IP Connector IR TX Transmitter port IR RX Receiver port 5iii. EX-1UTP-IR-100-EDID Transmitter 10 11 RS232 Port HDMI Input with LED Active Signal Indicator (Lit for active) Duplicate HDMI output with LED Active Signal Indicator (Lit for active) -
Page 6: Ex-1Utp-Ir-100-Edid Receiver
5iv. EX-1UTP-IR-100-EDID Receiver RS232 Port IR TX Transmitter port LED HDBT Link Indicator (Lit for active) IR RX Receiver port UTP IN DC 5V Power Input HDMI OUT TCP/IP Connector Connection & Operation Tip: You can locate the infrared sensor by shining a... -
Page 7: Edid & Upgrade Switcher Instruction
To enable LAN/internet content on your display device, connect an Ethernet cable from the Ethernet port on the RECEIVER to the corresponding LAN port on your display. Insert the IR receiver 3.5mm jack into the IR RX port on the RECEIVER. Attach the IR receiver to the front of your display with the adhesive backing, ensuring there is clear line of sight to the remote control being used. -
Page 8: Specification
Specification (EX-1UTP-IR-100-EDID) 100m/328ft Mass (Per Main unit) (Each) 8ii. Specification (EX-1UTP-IR-100-POH) sync) sync) 100m/328ft 12VDC 17 Watts Max (Pairs with EX-1UTP-IR-100-POH Transmitter) 145mmWx106mmDx29mmH/5.71”Wx4.17”Dx1.14”H (Transmitter) 130mmWx106mmDx29mmH/5.11”Wx4.17”Dx1.14”H (Receiver) 0.86kg / 1.87lbs (Each) NOTE: Specifications are subject to change without notice. Mass and dimensions are approximate. -
Page 9: Typical Applications
4. Once update has been completed, be sure to return the jumper caps to the ‘Normal’ position for RS232 control signal transmission to be passed. Note: Connect RS232 cables to the RS232 ports of the EX-1UTP-IR-100-POH Transmitter and the Receiver to form one extension cable. Typical Applications EX-1UTP-IR-100-EDID Part Number Part Number EX-1UTP-IR-100-POH ETHERNET... -
Page 10: Maintenance
Maintenance Warranty Clean this unit with a soft, dry cloth only. Never use Should you feel your product does not function alcohol, paint thinner or other harsh chemicals. adequately due to defects in materials or workmanship, we (referred to as “the warrantor”) will, for the length of Product Services the period indicated below (starting from the original date of purchase) either:... -
Page 11: Installation Test Notes
2. There are no express warranties except as listed under “limited warranty coverage.” The warrantor is not liable for incidental or consequential damage resulting from the use of this product or arising out of any breach of this warranty. For example: damages for lost time, the cost of having a person/persons remove or re-install previously installed equipment, travel to and from service location, loss of or damage to media, images, data or other recorded/stored... - Page 12 www.wyrestorm.com www.wyrestorm.com WyreStorm Offices WyreStorm Offices US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133 Tel: + 901 384 3575 Fax: + 901 384 3574 Tel: + 901 384 3575 Fax: + 901 384 3574 Unit 22, Ergo Business Park, Swindon, Wiltshire, SN3 3JW UK Unit 22, Ergo Business Park, Swindon, Wiltshire, SN3 3JW UK Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583...
Need help?
Do you have a question about the EX-1UTP-IR-100-EDID and is the answer not in the manual?
Questions and answers