Advertisement
●Getting started
1. Charging the battery of PBTR20
First time charging:
Please charge the battery fully for 2.5 hours before using the transmitter.
Low battery：
When you see the red LED flashing during use, the battery is low and needs to be
charged.
1. Plug charger or charging cable into the standard AC power socket.
2. Plug other end of charger or charging cable into charging port of PBTR20 RED light
on→Charging RED light off→Finished charging.
3. It will take about 2.5 hours to finish charging.
Please don't attempt to take out the battery from the PBTR20 as this might damage
it.
Attention:
1) The battery is recyclable.
2) Do not dispose of the battery in fire, as it may cause explosion.
●TX Mode
1. Switching on/off the transmitter
Function
Power off
Power on
2. Pairing with a Bluetooth device
After connecting the Bluetooth transmitter to stereo devices, you can
enjoy music wirelessly. Before pairing, please make sure your Bluetooth
stereo receiver supports Bluetooth A2DP profile.
Operation
Press and hold the
button for 3 seconds
Press and hold the
button for 3 seconds
LED indicator
The LED flashes red quickly
The LED flashes blue quickly
3
Advertisement
