Test Mode - Sony STR-DE895 Service Manual

FACTORY PRESET MODE
* All preset contents are reset to the default setting.
* Procedure:
While depressing the [MOVIE] and the [MAIN MENU] buttons
simultaneously, press the
?/1
The message "MEMORY CLEARING" and "MEMORY
CLEARED!" appears for a moment and the present contents are
reset to the default values.
AM CHANNEL STEP 9 kHz/10 kHz SELECTION
MODE (Except Mexican model)
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
While depressing the [PRESET TUNING +] button or the [TUNING
+] button, press the
?/1 button to turn on the main power.
Either the message "AM 9kHz Step" or "AM 10kHz Step"
appears for a moment and select the desired step.
FLUORESCENT INDICATOR TUBE TEST MODE
* All fluorescent segments are tested.
When this test is activated, all segments light on at the same
time, then each segment lights on one after another.
* Procedure:
While depressing the [SB DECODING] (DE895), the [SURR BACK
DECODING] (DE995) and the [DISPLAY] buttons simultaneously,
press the button to turn on the main power.
?/1
1. ALL segments light on.
D D D D
SLEEP SP.A SP.B NIGHT MODE DIGITAL EX
MULTI CH IN 1 2 2 CH A.DIRECT D.RANGE EQ NEO:6 MPEG
SW L C R
LFE SL S SR
SBL SB SBR
[MULTI CHANNEL DECODING], [VIDEO 1], [VIDEO 2], [VIDEO
3], [DVD] and [TV/SAT] LED light on.
2. Press the [DIMMER] button, confirm display.
[SURR BACK DECODING], [MD/TAPE], [CD/SACD], [TUNER FM/
AM] and [PHONO] LED light on.
3. Press the [DIMMER] button, confirm display.
[2CH], [A.F.D.], [MOVIE] and [MUSIC] LED light on.
4. Press the [DIMMER] button, all segments and all LEDs light on.
5. Every pressing the [DIMMER] button turns on each segment and
LED one after another in the same order.
SECTION 3

TEST MODE

button to turn on the main power.
PRO LOGIC I I DTS -ES 96/24 MONO MEMORY
-2AAC RDS
STEREO
OPT
COAX
D.ASSIGN
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
* Procedure:
While depressing the [2CH] button, press the
on the main power.
The message "S.F. Initialize" appears for a moment.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
While depressing the [A.F.D.] and the [DISPLAY] buttons
simultaneously, press the ?/1
The model name, the destination and the software version are
displayed for a moment.
COMMAND MODE SELECTION MODE
* The command mode (AV1 or AV2) of the remote commander
can be selected.
* Procedure:
While depressing the [ENTER] button, press the
turn on the main power.
Either the message "COM MODE [AV1]" or "COM MODE
[AV2]" appears for a moment and select the desired mode.
STR-DE895/DE995
button to turn
?/1
button to turn on the main power.
button to
?/1
13