Samsung Galaxy Note 3 User Manual page 186

Adding a Wi-Fi Network
1. From the main Settings page, tap
tab Wi-Fi Add Wi-Fi network.
2. Enter the Network SSID (the name of your Wireless
Access Point).
3. Tap the Security field and select a security option. This
must match the current security setting on your target
WAP (Wireless Access Point).
4. Enter your WAP's password if the WAP is secure.
5. Tap Connect to store the new information and connect
to the target WAP.
Note: An SSID is a unique key which identifies a wireless LAN.
Its purpose is to stop other wireless equipment from
accessing your LAN — whether accidentally or
intentionally. To communicate, wireless devices must be
configured with the same SSID.
181
Connections
Connections
Wi-Fi settings
Once set up for Wi-Fi connectivity, your device automatically
uses Wi-Fi, when available, for all your mobile services.
1. From the main Settings page, tap
tab Wi-Fi.
2. Press Menu and then tap Advanced. Configure
the settings as desired.
The available Wi-Fi connection are displayed with a security
type displayed next to them.
WPS Push Button
The WPS (Wi-Fi Protected Setup) feature (sometimes
associated with a physical or on-screen button on most
WAPs) allows you to pair your device and WAP without the
need for entering a passcode. This process is similar to Wi-Fi
Direct pairing.
In this case, once the WPS feature is active on your WAP,
your device can then detect it and then immediately pair to it.
Note: WPS-capable routers display in the Wi-Fi list of available
devices with the term (WPS available) below their name.
Connections
Connections