Advertisement
Riva
5
®
WhiRlpool Bath
9330
Riva 5 Whirlpool Bath, Left Hand
Riva
5
®
SoakeR Bath
9360
Riva 5 Bath
• Left Hand Drain Location
• Accessories / Hardware:
Trim Kit: 4 HTC Jet Rings #D095
Rotary Drain Kit, 26" Cable #8730
Trim Kit: 2 BMH Jet Rings #J869
Trip-Lever Drain Kit: #X559
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(849) – Oil Rubbed Bronze.
62"
21-1/2"
12" x 4"
Motor
5"
9-1/2"
2"
product Shown: Riva™ 5 Whirlpool Bath
left hand Shown model: 9330
* Measurements inside unit represent cutout in
floor to allow for drain/overflow.
Minimum Service Access dimensions given.
L
SIDE VIEW
© 2007 Jacuzzi Whirlpool Bath • 14525 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com
inStallation noteS
Refer to installation instructions included with fixture before
beginning installation. Please confirm product availability and
specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply
to non-jetted baths.
technical Specifications
DimenSionS
62" L x 43" W x 19" H
(1575 mm) L x (1092 mm) W x (483 mm) H
DRain/oveRfloW
A: 14-3/4" (375 mm) B: 9-1/2" (241 mm)
Cutout
Template Provided Part Number: P186000
total Weight
9330: 746 lb (338 kg) / 40 lb/sq. ft. (197 kg/m
9360: 701 lb (318 kg) / 38 lb/sq. ft. (185 kg/m
opeRating gallonage
48 U.S. Gal. (182 Liters)
pRoDuCt Weight
9330: 96 lb (44 kg)
9360: 51 lb (23 kg)
43"
SkiRt mounting
Not Available
eleCtRiCal SpeCifiCationS — moDel 9330 only
Requires a dedicated gfCi protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP , 60 Hz.
RapidHeat™: 120 VAC, 15 AMP , 60 Hz.
12" H x 18" L
heateR (optional) — moDel 9330 only
Service Access
Requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N S750000
W
H
END VIEW
2
)
)
2
A
2''
B
DRAIN/OVERFLOW
#FS10-000 05/08
Advertisement
