CMO Operations & Logistics
WW Competence Transfer
MMultimedia Creation & Support
17.) Separate the LCD Module from the Display Metal
Shield.
19.) Release the VGA Camera with the SS-51. Hold the
Main Flex near the Camera Socket while removing the
21.) Shift the unit into mid position. Release the connector
of the Main Flex Assy.
23.) Lift the glued Power Switch carefully.
Service Manual 6280
Page
1
(27)
CONFIDENTIAL
18.) Release the Camera Guide Assy with the SRT-6.
20.) For Assembly: Mind the correct positioning of the VGA
Camera.
22.) Slot the flex connector through the C-Cover Assy care-
fully.
Copyright © 2005 NOKIA Corporation. All rights reserved.
Approved 3.0
MGR
16.11.2005