Vista PowerDome 1. Introduction This guide provided by Maxey Moverley Limited contains programming instructions to aid onsite engineers in tackling common problems when installing Vista PowerDome cameras. This information has been compiled from publicly available documentation in conjunction with the observations of Maxey Moverley Limited.
Make cable connections for both the Coaxial and UTP interface module as shown in the diagram. 2.3 Interface Module Wire the interface module as sown in the diagram. Maxey Moverley Limited, 6 Broad Ground Road, Lakeside, Redditch, Worcestershire, B98 8YP Web: www.cctvrepairs.com ● Email: enquiries@maxeymoverley.com Tel: 01527 522299 ● Fax: 01527 522588...
When you use UTC control, each receiver needs to tune to the transmitter. Select each dome in turn, and pan left and right until the dome moves. This should take about 5 to 10 seconds. Maxey Moverley Limited, 6 Broad Ground Road, Lakeside, Redditch, Worcestershire, B98 8YP Web: www.cctvrepairs.com ● Email: enquiries@maxeymoverley.com Tel: 01527 522299 ●...
01527 522299 and speak to one of our specially trained technicians will who will be happy to assist you. Maxey Moverley Limited, 6 Broad Ground Road, Lakeside, Redditch, Worcestershire, B98 8YP Web: www.cctvrepairs.com ● Email: enquiries@maxeymoverley.com Tel: 01527 522299 ●...
Need help?
Do you have a question about the Vista PowerDome and is the answer not in the manual?
Questions and answers