Advertisement
1 Connect the plug to a power supply socket.
2 Press and hold the
» The default temperature setting 160°C is displayed (
3 Press the
temperature setting.
» When the heatng plates are heating up, the temperature digits
will blink.
When the heating plates have reached the selected
»
temperature, the temperature digits stop blinking.
ThermoGuard prevents you from unintentional heat exposure above
200°C. When you increase the temperature above 200°C, the
temperature will increase only 5°C by each step.
4 The ion function is activated when the appliance is switched on,
which provides additional shine and reduces frizz.
» The ion indicator (
You may smell a special odor and hear a sizzling sound. It is
»
common because they are caused by the ion generator.
5 Slide the closing lock (
6 After the straightener is switched on, the keys are automatically
locked if no button is pressed for 15 sec. Subsequently, the keys are
locked if no button is pressed for 5 sec.
To unlock the appliance, press
7 Comb your hair and then start by clipping your blow dried hair into
sections not wider than 5cm.
Note: For thicker hair, it is suggested to create more sections.
8 Place a section of hair in between the heating plates (
Note: Cool down the appliance before you remove or install either one
or both combs.
button (
or
buttons (
) is displayed.
) downwards to unlock the appliance.
) until the display screen lights up.
) to select your desired
for 1 sec .
).
) and press
Advertisement
