Subscribe to Our Youtube Channel
Related Manuals for Linkskey LKS-SG9P8
Summary of Contents for Linkskey LKS-SG9P8
-
Page 1: Ethernet Switch
9-port Gigabit Ethernet Switch with 8-port PoE LinksKey LKS-SG9P8 9-port Gigabit Ethernet Switch with 8-port PoE User Manual Rev. 1.0... -
Page 2: Table Of Contents
9-port Gigabit Ethernet Switch with 8-port PoE Contents Chapter 1 Introduction ..................1 1.1 Product Overview ................. 1 1.2 Package Contents ................1 1.3 Physical Description ................1 Front Panel ..................1 Back Panel..................3 Chapter 2 Installation................... 4 2.1 Safety Precautions ................5 2.2 Site Requirements ................ -
Page 3: Chapter 1 Introduction
Chapter 1 Introduction 1.1 Product Overview The Linkskey LKS-SG9P8 Gigabit Ethernet with 8-port PoE Switch provides you with an ideal seamless solution of high performance, low cost, easy-to-use, and boosts your 10/100Mbps local area network to 1000Mbps. The switch supports 10/100/1000M auto-sensing, and protects the existing network investment when you enjoy the gigabit network. - Page 4 9-port Gigabit Ethernet Switch with 8-port PoE (1) RJ45 Ports Figure 1-1 Front Panel There are nine 10/100/1000M RJ45 ports, of which port 9 is the Normal/Uplink port, others are downlink ports. From port 1 to 8 of the downlink ports are PoE-capable, details shown as Table 1-1.
-
Page 5: Back Panel
9-port Gigabit Ethernet Switch with 8-port PoE Color Status Description Solid The switch is powered on POWER Green The switch is powered off or its power supply is improper PoE consumption exceeds the power limit or no Solid more PDs can be powered on PoE-MAX Green PoE consumption is proper Proper network connection on the corresponding... - Page 6 9-port Gigabit Ethernet Switch with 8-port PoE (3) Power Input Jack Plug the DC power output to this power input jack to supply power for the switch. Power Input 100-240V AC, 50/60Hz Power Output 51V DC, 2.5A Note: Please use only the power supply provided with the switch.
-
Page 7: Chapter 2 Installation
Keep the switch away from nearest source of high voltage, such as power lines, electric lamps, grids, etc. Note: If needed to open the device’s housing, please contact Linkskey to get permission, or you have to be responsible for the result that the device cannot be maintained because of unpermitted operation. -
Page 8: Cleanness
9-port Gigabit Ethernet Switch with 8-port PoE Cleanness To avoid the effect of static electricity on the operation of the switch, please refer to the followings: Dust the switch regularly, and keep the indoor air clean Keep the switch well-grounded and ensure static electricity has been transferred Lightning Protection To avoid the damage of electronic devices made by the extremely high voltage... -
Page 9: Product Installation
9-port Gigabit Ethernet Switch with 8-port PoE 2.4 Product Installation Desktop Installation Step 1: Set the bottom of the switch up on a flat and stable desktop. Step 2: Paste four cushions in the corresponding concave places at the bottom. Step 3: Turn over the switch and place it face up on the workbench. -
Page 10: Wall Mount Installation
9-port Gigabit Ethernet Switch with 8-port PoE Note: Select the installation surface carefully. If the surface is not proper, the reliability of this installation will be compromised Too high installation position or vibration might cause a fall leading to switch damage or personal injury When installation is finished, don't move the switch very often to avoid surface coating damage To make it cable more easily, please place the switch bottom up when you... -
Page 11: Connect To Protective Grounding Cable
9-port Gigabit Ethernet Switch with 8-port PoE Figure 2-3 Wall Mount Installation 2.5 Connect to Protective Grounding Cable Proper connection of the protective grounding cable is not only for quickly releasing the overvoltage and overcurrent resulting from lightning, but also necessary precaution of preventing bodily injury. -
Page 12: Chapter 3 Hardware Connection
9-port Gigabit Ethernet Switch with 8-port PoE Note: The switch’s grounding cable should be connected to the metal support rod. Chapter 3 Hardware Connection Connection Procedures Step 1: Use a RJ45 Ethernet cable to connect an upstream network device (such as another switch or a router) to the Normal/Uplink port which is port 9 on the switch, shown as Figure 3-1. - Page 13 9-port Gigabit Ethernet Switch with 8-port PoE Figure 3-2 Installation with Powered Devices Step 3: Use the AC power adapter provided in the product package to supply power for the switch, shown as Figure 3-3. Figure 3-3 Installation with the AC power adapter Step 4: After powered up, the switch begins auto-initialization.
-
Page 14: Appendix
9-port Gigabit Ethernet Switch with 8-port PoE Appendix A. Technical Specifications Item Specification IEEE 802.3i 10Base-T Ethernet IEEE 802.3u 100Base-Tx Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet Protocol & Standard IEEE 802.3x Flow Control IEEE 802.3af PoE IEEE 802.3at PoE+ Total power of the switch: 127.5W maximum Total power of the PoE power supply: 121.22W Power Supply... -
Page 15: Safety And Emission Statement
9-port Gigabit Ethernet Switch with 8-port PoE B. Safety and Emission Statement CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Need help?
Do you have a question about the LKS-SG9P8 and is the answer not in the manual?
Questions and answers