Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Dynamic Engineering PMC2PCI
-
Page 1: User Manual
DYNAMIC ENGINEERING 435 Park Dr., Ben Lomond, Calif. 95005 831-336-8891 Fax 831-336-3840 http://www.dyneng.com sales@dyneng.com Est. 1988 User Manual PMC2PCI PMC TO PCI Converter Revision B Corresponding Hardware: Revision C/D 10-2001-1203... - Page 2 Dynamic Engineering has made every effort to ensure that this manual is accurate and complete. Still, the company reserves the right to make improvements or changes in...
-
Page 3: Table Of Contents
Table of Contents PRODUCT DESCRIPTION APPLICATIONS GUIDE Interfacing Construction and Reliability Thermal Considerations WARRANTY AND REPAIR Service Policy Out of Warranty Repairs For Service Contact: SPECIFICATIONS ORDER INFORMATION Page Electronics Design • Manufacturing Services... -
Page 4: Product Description
Product Description For development or production use the PMC2PCI card to install a PCI form factor device into a PMC compatible slot. Use less expensive or off-the- shelf components until your PMC card is ready or for temporary debugging situations. For production mode situations the available riser card will reduce the effective height of the installed PCI card. -
Page 5: Applications Guide
Installation The PMC2PCI is mounted to the host card prior to installation within the chassis. For best results: with the host bracket installed, install the PMC at an angle so that the PMC2PCI front panel bezel penetrates the host bracket then rotate down to mate with the PMC [PnX] connectors. -
Page 6: Construction And Reliability
PCI card installed into the PMC2PCI than the PMC2PCI itself, and it is smart system design when it can be achieved. Construction and Reliability The PMC2PCI is constructed out of 0.062 inch thick FR4 material. The components on the PMC2PCI are tied into the internal power planes to spead the dissipated heat out over a larger area. -
Page 7: Warranty And Repair
Warranty and Repair Dynamic Engineering warrants this product to be free from defects in workmanship and materials under normal use and service and in its original, unmodified condition, for a period of one year from the time of purchase. If the product is found to be defective within the terms of this warranty, Dynamic Engineering's sole responsibility shall be to repair, or at Dynamic Engineering's sole option to replace, the defective product. -
Page 8: Out Of Warranty Repairs
Return transportation and insurance will be billed as part of the repair and is in addition to the minimum charge. For Service Contact: Customer Service Department Dynamic Engineering 435 Park Dr. Ben Lomond, CA 95005 831-336-8891 831-336-3840 fax InterNet Address support@dyneng.com... -
Page 9: Specifications
PMC dimensions. Construction: FR4 Multi-Layer Printed Ci rcuit, Through Hole and Surface Mo Components. Order Information ø standard temperature range 0-70 PMC2PCI PMC into PCI slot adapter http://www.dyneng.com/pmc2pci.html All information provided is Copyright Dynamic Engineering Page Electronics Design • Manufacturing Services...
Need help?
Do you have a question about the PMC2PCI and is the answer not in the manual?
Questions and answers