First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-150)
for power. Never try to use any other type of battery.
Loading the Battery
1.
Open the frame (page 13).
2.
Open the cover.
While depressing the [OPEN] button, slide
the cover in the direction of arrow
nearby illustration.
3.
Load the battery.
With the CASIO logo on the battery
upwards, load the battery into the
camera as shown in the illustration.
4.
Close the cover.
• Positioning the cover about two millimeters from
the lens unit, keep it parallel with the camera as
you slide it in the direction of arrow
arrow
to secure it in place.
2
1
in the
2
[OPEN] button
and then
1
18
3
2
Battery
NG
OK
CASIO logo
1
2mm
2
Quick Start Basics