Fender BULLET 15 DSP Service Manual page 7

PARTS LIST:
QTY. PART #
3 * LED, RED LONG LEAD LUMEX
1 * SPACER LED .5x.1 BRN
1 * RES CF 1/2W 1.5k 5%
1 * RES CF 1/2W 5.6 ohm 5%
2 * RES CF 1/4W 27k 5%
3 * RES CF 1/4W 100k 5%
6 * RES CF 1/4W 10k 5%
3 * RES CF 1/4W 15k 5%
1 * RES CF 1/4W 180k 5%
4 * RES CF 1/4W 1k 5%
2 * RES CF 1/4W 1M ohm 5%
*
4 RES CF 1/4W 2.2k 5%
5 * RES CF 1/4W 220k 5%
4 * RES CF 1/4W 22k 5%
4 * RES CF 1/4W 30k 5%
5 * RES CF 1/4W 3.3k 5%
1 * RES CF 1/4W 4.7k 5%
2 * RES CF 1/4W 470k 5%
*
5 RES CF 1/4W 47k 5%
1 * RES CF 1/4W 5.1Kohm 5%
2 * RES CF 1/4W 510Kohm 5%
3 * RES CF 1/4W 6.8k 5%
1 * RES CF 1/4W 75k 5%
1 * RES CF 1/4W 8.2k 5%
1 * RES CF 1/4W 82k 5%
2 * RES CF 1/4W 820ohm 5%
1 * RES CF 1/4W 120k 5%
2 * RES FILM 1W .68 ohm 5%
2 * RES FILM 1W 120 ohm 5% LL
2 * RES FILM 1W 220ohm 5%
2 * SCRW M 4-40x3/8 PHP BLX
*
2 SCRW TF 6-32x3/8 PHP ZI
2 * NUT HEX 4-40 EX LOCK
1 * INSULATOR MICA TO-220
1 * SWITCH PUSH SLFLK SHORT STROKE
1 * BUTTON PUSH OFF WHITE
1 * **PCB WIRE SET, BULLET 15 DSP
1 * WSHR SHLDR NYL 1/8x1/4
2 * XSTR N-CH JFET J111 TO-92
2 * **FUSE CLIP PCB 5MM
42 * JUMPER WIRE 22 GA
* Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY on page 4.
Unique Fender® part. Order directly from the Fender® dealer Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency...–Value, if specified –Type, if specified –Approval Mark(s) if on part.
** Both a unique Fender® part and a Safety Requirement part as defined above.
MAIN – PCB ASSEMBLY
DESCRIPTION
BULLET® 15 DSP
(This is the model name for warranty claims)
(continued)
REFERENCE DESIGNATION
D1-2 D16
@ D16
R64
R44
R50-51
R38 R46-47
R8 R37 R61 R67 R71 R73
R1 R6 R32
R36
R7 R26 R54-55
R66 R76
R12 R59 R69-70
R10 R14-15 R23 R25
R16-17 R31 R77
R52-53 R56-57
R19 R21 R49 R74-75
R68
R22 R48
R11 R27-30
R5
R2 R4
R3 R58 R72
R60
R18
R9
R41 R45
R78
R42-43
R39-40
R62-63
@ U5 U7
@ HEATSINK
@ U5 U7
@ U5
S1
@S1
@ U5
Q1-2
F1
W1-21 W23-43
7