Do you have a question about the P29004 and is the answer not in the manual?
Questions and answers
Hugh O'Donnell
April 16, 2025
Havent used it for years - Having filled it and plugged it in a live socket how do I make it steam
1 comments:
Mr. Anderson
May 8, 2025
To make the Pifco P29004 steam after not using it for years, follow these steps:
1. Check the unit: Ensure there is no visible damage and the unit is clean and dry. 2. Assemble: Make sure the steam mop is fully assembled as described in the manual. 3. Fill Water Tank: Unplug the unit and fill the water tank with clean water. 4. Plug In: Plug the power cord into a grounded outlet. The red light will turn on, indicating power. 5. Power On: Turn the Power Switch to the ON (I) position. 6. Wait for Heating: Wait about 20–30 seconds for the green “Ready-to-Use” indicator to turn on. 7. Select Steam Level: Use the Steam Regulator to choose a steam output (1 - Low, 2 - Medium, 3 - High, or 4 - Hot Spray). 8. Test and Use: Always test on a hidden area of the surface before cleaning.
Do not use on steam-sensitive materials and avoid directing steam at people, animals, or plants.
This answer is automatically generated
Hugh O'Donnell
April 16, 2025
Havent used it for years- How to make it steam after plugging it in
1 comments:
Mr. Anderson
May 8, 2025
To make the Pifco P29004 steam after plugging it in:
1. Ensure the unit is fully assembled and filled with water. 2. Plug the power cord into a grounded electrical outlet. 3. Make sure the Power Switch is in the OFF (O) position before plugging in. 4. After plugging in, the red Power Indicator light will turn on. 5. Wait for the Ready-to-Use indicator to turn green (about 20–30 seconds). 6. Adjust the Steam Regulator to set the steam level. 7. Begin using the steam mop once the green light is on.
PFD has limited liability for incidental or consequential loss or damage. This guarantee is only Valid in the UK and Eire Only. Technical Data Specification Sutton House, Model No. Berryhill Road, P29004 Fenton Rated Voltage & Frequency Stoke on Trent 220V-240V 50Hz Staffordshire, Power consumption ST4 2NL.
IMPORTANT SAFEGUARDS Do not handle the plug or the Steam Mop with wet hands or operate without shoes. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE Do not insert any objects into openings in the unit. Do not use with any opening PLEASE READ CAREFULLY.
Electrical safety HOW TO ASSEMBLE THE STEAM MOP WARNING Class 1 Configuration Please make sure that the unit is unplugged from an electrical outlet and the Power Switch(O / I)is in the “OFF"(O)position before assembling The wires in the mains lead are coloured in accordance with the following code: the unit or changing the accessories.
HOW TO USE THE STEAM MOP Insert the Power Supply Cord into the Cord Holder located at the top of the Extension Handle as illustrated in Fig.4c PLEASE READ BEFORE USING THE STEAM MOP and then insert Power Supply Cord The Steam Mop is designed to thoroughly clean floor surfaces, such as marble, into the ceramic, carpet, stone, linoleum, and sealed hardwood floors and parquet.
2)Select the Steam Regulator positions: 1) Filling the Water Tank. There are 4 settings 1 - Low, 2 – Medium, 3 - High and 4 - Hot Spray CAUTION •1 - Low Ideal for cleaning all hard floors, such as linoleum, ceramic, marble, wood, Make sure that the Steam Mop is unplugged.
HOW TO USE HAND - HELD STEAMER CAUTION 5) When the Hand - Held Steamer stops emitting steam, simply turn OFF and unplug Make sure that the Steam Mop is unplugged. the unit, refill the Water Tank and continue cleaning. 1) Fill the Water Tank wit water.
Staffordshire, ST4 2NL. Disposal of Unit Disposal instructions for Pifco items in accordance with the WEEE directive. Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You are required to dispose of old electrical and electronic appliances like this separately.
Need help?
Do you have a question about the P29004 and is the answer not in the manual?
Questions and answers
Havent used it for years - Having filled it and plugged it in a live socket how do I make it steam
To make the Pifco P29004 steam after not using it for years, follow these steps:
1. Check the unit: Ensure there is no visible damage and the unit is clean and dry.
2. Assemble: Make sure the steam mop is fully assembled as described in the manual.
3. Fill Water Tank: Unplug the unit and fill the water tank with clean water.
4. Plug In: Plug the power cord into a grounded outlet. The red light will turn on, indicating power.
5. Power On: Turn the Power Switch to the ON (I) position.
6. Wait for Heating: Wait about 20–30 seconds for the green “Ready-to-Use” indicator to turn on.
7. Select Steam Level: Use the Steam Regulator to choose a steam output (1 - Low, 2 - Medium, 3 - High, or 4 - Hot Spray).
8. Test and Use: Always test on a hidden area of the surface before cleaning.
Do not use on steam-sensitive materials and avoid directing steam at people, animals, or plants.
This answer is automatically generated
Havent used it for years- How to make it steam after plugging it in
To make the Pifco P29004 steam after plugging it in:
1. Ensure the unit is fully assembled and filled with water.
2. Plug the power cord into a grounded electrical outlet.
3. Make sure the Power Switch is in the OFF (O) position before plugging in.
4. After plugging in, the red Power Indicator light will turn on.
5. Wait for the Ready-to-Use indicator to turn green (about 20–30 seconds).
6. Adjust the Steam Regulator to set the steam level.
7. Begin using the steam mop once the green light is on.
This answer is automatically generated