Kodak EasyShare M853 User Manual page 32

Doing more with your camera
Press Menu
OK to access settings
White Balance
Choose your lighting
condition.
Exposure Metering
Evaluate light levels at specific
areas of a scene.
ISO Speed
Control the camera's
sensitivity to light.
26
, and Options
Auto (default)—automatically corrects white balance. Ideal
for general picture taking.
Daylight—for pictures in natural lighting.
Tungsten—corrects the orange cast of household light bulbs.
Ideal for indoor pictures under tungsten or halogen lighting
without flash.
Fluorescent—corrects the green cast of fluorescent lighting.
Ideal for indoor pictures under fluorescent lighting without
flash.
Open Shade—for pictures in shade in natural lighting.
Multi-Pattern (default)—evaluates lighting conditions
throughout the image to give an optimum picture exposure.
Ideal for general picture taking.
Center-Weight—evaluates the lighting conditions of the
subject centered in the lens. Ideal for backlit subjects.
Spot—similar to Center-weighted, except the metering is
concentrated on a smaller area of the subject centered in the
viewfinder. If used with Selectable AF zones, the exposure spot
follows the focus zone. Ideal when you need an exact exposure
of a specific area in the picture.
Choose a lower ISO setting in brightly lit scenes; use a higher
ISO for low-light scenes. Choose Auto (default), 80, 100, 200,
400, 800, 1250.
NOTE: ISO returns to Auto when the camera is set to Portrait or SCN
mode.
Unavailable in Video mode.
www.kodak.com/go/support