Directed Electronics SIRIUS SLBB2 Owner's Manual page 16

Stiletto universal boombox, sirius satellite radio
Table of Contents

Advertisement

SIRIUS audio begins after the Stiletto completes its power up cycle. If it does not, adjust the volume of the Boombox by
pressing the Volume Up button on the front panel. Make sure "sat" source has been selected.
If you want to listen to an external audio device such as a computer, MP3 player or CD player through the Boombox, do the
following:
1. Connect the output of the audio device to the AUX connection at the front of the Boombox. Press the SOURCE
button to select the AUX input.
2. Adjust the volume on the audio device to obtain satisfactory audio output from the Boombox. If the sound is
distorted, lower the volume level on the audio device.
Pressing the bass button switches between flat and bass boost.
Backlight behind the power button is red in power off mode when connected to AC power and turns blue when powered on.
All other buttons will light blue for 10 to 20 seconds and then go to sleep until a button is pressed. In battery operation, the
power button will flash red when the batteries are almost discharged.
If Boombox is left on with no sound for a period of over 5 to10 minutes it will turn the power off automatically.
The Boombox will charge the docked Stiletto radio provided the AC power adapter is connected. The Stiletto will not be
charged when operating the Boombox with battery power.
Low battery status is indicated when BLUE power LED begins blinking RED on the SLBB2.
Low battery status is not indicated by the power LED when SLBB2 is in Sleep mode.
NOTE:
When switching between power operation modes (AC or Battery), the Boombox and Stiletto radio should be powered off.
When installing or removing the Stiletto radio from the Boombox, the Boombox and Stiletto radio should be powered off.
1
© Directed Electronics, all rights reserved.

Advertisement

Table of Contents
loading

Table of Contents