Related Manuals for SANLI GTS26
Summary of Contents for SANLI GTS26
- Page 1 Engine-powered brush cutter www.sanli.co.uk PLEASE KEEP THIS MANUAL IN A SAFE PLACE...
-
Page 2: Table Of Contents
3.33 Transporting and maintaining the petrol brush cutter......17-18 4. Technical Characteristics ................. 19 5. Troubleshooting....................20 Environmental Protection................21 After sales service ..................21 Warranty ......................22 Declaration of Conformity................23 Warranty registration card ..............Back of Manual 2 / Operator’s Manual Sanli GTS26... - Page 3 DETAILED DESCRIPTION OF THE PETROL BRUSH CUTTER Spark plug lid Safety trigger Start/Stop switch Priming pump Lower handle Recoil starter handle Trimmer Head Air filter cover Shield Choke lever Safety handles 2 stroke petrol tank Throttle control Single harness Operator’s Manual Sanli GTS26 / 3...
-
Page 4: Introduction
Introduction Thank you for choosing our product and congratulations on purchasing your new SANLI petrol brush cutter. We are confident that this equipment, when properly maintained, will give you years of trouble-free operation and you will be able to fully appreciate its quality, performance and comfort. -
Page 5: Safety Instructions
Secure the tool Turn the trimmer off and place the Start/Stop switch in the STOP position before carrying out any cleaning, transport or maintenance or while you leave it unsupervised. Disconnect the spark plug cap. Operator’s Manual Sanli GTS26 / 5... - Page 6 Do not use the brush cutter while others, especially children or pets, are nearby. Wear protective gloves Wear hard, anti-slip shoes Wear eye and ear protection Fuel Use only “2 stroke mixture” (petrol oil).. 6 / Operator’s Manual Sanli GTS26...
-
Page 7: Before Using The Petrol Brush Cutter
- In enclosed premises - For public or professional areas (parks, sporting venues, roads, agricultural or forest areas, etc.) - In an intensive way - By children under the age of 16 - By non-accompanied minors. Operator’s Manual Sanli GTS26 / 7... -
Page 8: When Using The Petrol Brush Cutter
• Always work while in a stable, balanced and sturdy position. Do not work on very steep slopes. • Don’t overload the machine. Always use the appropriate tool for the work to be carried out. 8 / Operator’s Manual Sanli GTS26... -
Page 9: After Using The Petrol Brush Cutter
• Maintain the tool and replace all worn or damaged parts. • Only have your brush cutter repaired by qualified personnel and only use original parts or those approved by SANLI UK. Keep the brush cutter clean and always store it unplugged, in •... -
Page 10: Usage Guidelines
Usage Guidelines Modifications not authorised by SANLI can render the tool dangerous and may lead to serious injuries during use. SANLI UK will not accept any liability for any type of misuse or for any use which does not conform to these instructions or to current regulations. - Page 11 Hold still the spool’s centre core (a, Fig 7) by passing the tool provided through the two holes as shown in figure 7. With the help of the spanner provided, loosen the securing nut (b, Fig. 7) in the direction of the arrow. Central core Operator’s Manual Sanli GTS26 / 11...
-
Page 12: Filling Up With Fuel
• Mix in the quantity of oil required for the volume of petrol to obtain the required mixture (see section 4: technical characteristics). • Do not mix the two directly in the machine’s tank. Use an adapted container and carefully respect the mixture ratio as specified. 12 / Operator’s Manual Sanli GTS26... -
Page 13: Using The Petrol Brush Cutter
The starting method differs depending on whether the motor is hot or cold. Starting when the motor is cold • Place the tool on an even surface, hold the handle with your left hand, and hold the rear handle firmly with your right knee. Operator’s Manual Sanli GTS26 / 13... -
Page 14: Stopping The Brush Cutter
3.22 Stopping the brush cutter • Release the throttle lever. • Put the Start/Stop switch into the STOP position. • The nylon line will stop completely after a brief moment. 14 / Operator’s Manual Sanli GTS26... -
Page 15: Adjusting The Cutting Wire During Use
• Be very careful of the tool kicking back when it hits hard objects. NOTE: Regularly remove cut grass that has accumulated between the spool and the edge of the deflector to stop the tool vibrating. Operator’s Manual Sanli GTS26 / 15... -
Page 16: Changing The Nylon Line
WARNING: Never immerse the brush cutter in water or in other liquids to clean it. Never clean the tool with a strong water jet or high-pressure water. 16 / Operator’s Manual Sanli GTS26... -
Page 17: Storing And Transporting The Petrol Brush Cutter
Rinse the filter with clean water and delicately press it to remove the maximum amount of water. Leave it to dry in the open air until it is completely dry. Once dry, moisten the filter with clean motor oil Operator’s Manual Sanli GTS26 / 17... - Page 18 NOTE: A spark which is too tight may cause irreversible damage to the bolt. Replace the spark plug cap by pressing it in firmly into place. 18 / Operator’s Manual Sanli GTS26...
-
Page 19: Technical Characteristics
Model GTS26 Type of tool Petrol brush cutter Engine Sanli-25,4, 2 stroke, Sinlge-cylinder – air cooled Displacement 25.4 cm Power 2800 +/-200 t/min Type of spark plug Champion RCJ6Y Maximum power 700 W @ 7000 t.min-1... -
Page 20: Troubleshooting
SANLI- approved repairer The cutting line doesn’t Dismantle and clean come out The automatic nylon the line and its support line feeding system is or contact a SANLI- dirty approved repairer 20 / Operator’s Manual Sanli GTS26... -
Page 21: Environmental Protection
Please quote this number when contacting the Dealer-Repairer for any request for replacement. Use only original parts or those approved by SANLI UK. Operator’s Manual Sanli GTS26 / 21... -
Page 22: Warranty
In no case will the guarantee result in a refund of hardware or direct or indirect damages. The liability of SANLI UK cannot in any case be sought for a value higher than that of the tool in question. In particular, SANLI UK declines all liability in case of any material or immaterial damage caused by this device. -
Page 23: Declaration Of Conformity
OF CONFORMITY CONFORMITY Fujian Jinjiang Sanli Engine Co., Ltd. declares that the following equipment manufactured by Fujian Jinjiang Sanli Engine Co., Ltd. conforms to the following Directive(s): 98/37/EC amended by directive 2004/26/EC on polluting particles,2006/42/EC,2006/95/EC(low voltage directive) and 2000/14/EC on the noise emission in the environment by equipment for use outdoors, amended by Directive 2005/88/EC. - Page 24 Sanli also make… Engine-powered chainsaws Electric chainsaws 3 in 1 electric leaf blower 24 / Operator’s Manual Sanli GTS26...
- Page 25 Sanli also make… Electric walk-behind lawnmowers Engine-powered walk-behind lawnmowers Engine-powered walk-behind lawnmowers Operator’s Manual Sanli GTS26 / 25...
- Page 26 Sanli also make… Electric hedge trimmers Engine-powered hedge trimmers Electric strimmers Electric edge cutter 26 / Operator’s Manual Sanli GTS26...
- Page 27 Engine-powered generators Operator’s Manual Sanli GTS26 / 27...
- Page 28 28 / Operator’s Manual Sanli GTS26...
- Page 29 www.sanli.co.uk...
-
Page 30: Warranty Registration Card
WARRANTY CARD REGISTER YOUR MACHINE TO VALIDATE YOUR WARRANTY. To validate your warranty, register your equipment with SANLI UK after its purchase by returning the warranty card provided at the back of the user's manual or on the website www.sanli.co.uk/register/.