Viewfinder - Seitz Roundshot 28-220 Outdoor Instruction Manual

1.4.2 Vertical height of image
Normal lenses
41.5°
83°
41.5°
Height of image: 83°

1.5 Viewfinder

1.5.1 Insert viewfinder
The viewfinder can be fitted easily in the socket (1). For this the trimming on the viewfinder needs to point forward.
Slide viewfinder in until it clicks to lock. The viewfinder can be rotated by 360°.
Important: do not turn the camera head. This can transport film when the mechanical-electrical lock (5) is off.
1.5.2 Determine image field with the viewfinder
Turn the smaller part of the viewfinder with the positioning thread towards the object.
The vertical image field can be determined as follows:
Upper margin
of image
Lower margin
of image
© by Seitz Phototechnik AG, Hauptstr. 14, 8512 Lustdorf, Switzerland
Phone: +41 52 376 3353, Fax: +41 52 376 3305, seitz@roundshot.ch, www.roundshot.ch
Technical changes reserved, Status: 4.2007
Shift lenses
81°
View-
finder
Positioning
thread
49.5°
31.5°
Height of image: 81°
For example: Nikon PC Shift: +/- 8mm
Look through viewfinder from above until the upper
limit of the viewfinder aligns with the positioning
thread. The corresponding point in space is the lower
margin of the image.
Look through viewfinder from below until the lower
limit of the viewfinder aligns with the positioning
thread. The corresponding point in space is the upper
margin of the image.
The same applies
when the lens is
shifted downwards
Page 5