Huawei S5700-HI Series User Manual page 7

Item
S5700-28C-HI
MPLS L3VPN
MPLS L2VPN
MPLS features
MPLS-TE
MPLS QoS
VPLS Martini VPLS
IP routing Static routing, RIPv1, RIPv2, OSPF, IS-IS, BGP, and ECMP
Neighbor Discovery (ND)
Path MTU (PMTU)
IPv6 ping, IPv6 tracert
IPv6 features 6to4 tunnel, ISATAP tunnel, and manually configured tunnel
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or
protocol type
MLD v1/v2 snooping
IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs
Multicast load balancing among member ports of a trunk
multicast
Controllable multicast
Port-based multicast traffic statistics
IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM
Rate limiting on packets sent and received by an interface
Packet redirection
Port-based traffic policing and two-rate three-color CAR
Eight queues on each port
WRR, DRR, PQ, WRR+PQ, and DRR+PQ queue scheduling algorithms
QoS/ACL WRED
Re-marking of the 802.1p priority and DSCP priority
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source
MAC address, destination MAC address, source IP address, destination IP address,
port number, protocol type, and VLAN ID
Rate limiting in each queue and traffic shaping on ports
User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
Blackhole MAC address entries
Limit on the number of learned MAC addresses
Security
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC
SSH v2.0
Hypertext Transfer Protocol Secure (HTTPS)
CPU defense
Blacklist and whitelist
S5700-28C-HI-24S S5710-108C-PWR-HI
5