Table of Contents
Advertisement
Fitting the Décor Door
3) Clasp the eyelet holes
in the rail on the inside
of the décor door over
the bolts protruding from
the top edge of the
refrigerator door. Secure
these using the nut caps
provided, as shown in
the above illustration.
Make sure that you have
the décor door attached
levelly before proceeding
to the lower fastenings
as shown on right.
1) Using a 2.8mm
diameter bit, make
holes sufficient to
attach the rail as
NOTE:
You need
shown on the left.
the tools
NOTE – door area
shown
here.
below the rail
must reach to just
below appliance.
2) Fix the hanging
rail onto the inside
of the décor door
using two 10mm
screws, centering it
so that 262mm of
its width is on either
side of the
imaginary vertical
middle line of the
décor door.
18
Advertisement
Table of Contents
