Soundstream H-540DiMT Instruction Manual page 4

Hide thumbs Also See for H-540DiMT:
Table of Contents

Advertisement

Available languages

Available languages

The ventilation should not be impeded by
covering the ventilation openings with items such
as newspaper, table-cloths, curtains etc. Make
sure there is at least 20 cm of space above and
at least 5 cm of space on each side of the unit.
Do not place this unit close to strong magnetic
field.
Do not place the unit on the amplifier or receiver.
Don't place this unit close to the damper, or the
moisture will affect the life of the laser head.
If the system is brought directly from a cold to
a warm location, or is placed in a very damp
room, moisture may condense on the lens
inside the player. Should this occur, the system
will not operate properly. Remove the disc and
leave the system turned on for about an hour
until the moisture evaporates.
To keep the laser pickup clean, do not touch it,
and always close the disc tray.
Should any solid object or liquid fall into the
system, unplug the system and have it checked
by qualified personnel before operating it any
further.
Do not attempt to clean the unit with chemical
solvents as this might damage the finish. Use a
clean, dry or slightly damp cloth.
When removing the power plug from the wall
outlet, always pull directly on the plug, never
yank on the cord.
Depending on the electromagnetic waves used
by a television broadcast, if a TV is turned on
near this unit while it is also on, lines might
appear on the TV screen. Neither this unit nor
the TV are malfunctioning. If you see such lines,
keep this unit well away from the TV set.
Do not move the unit during playback
During playback, the disc rotates at high speed.
Do NOT lift or move the unit during playback.
Doing so may damage the disc or the unit.
When moving this unit
When changing places of installation or packing
the unit for moving, be sure to remove the disc
and return the disc tray to its closed position in
the player. Then, press the power switch to
turn the power off, and disconnect the power
cord. Moving this unit with the disc loaded may
result in damage to this unit.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
This unit includes this label:
The type plate is located on the rear of the unit.
3

Advertisement

Chapters

Table of Contents
loading

Table of Contents